KSuite Full CD files contain driver/video tutorial for KSuite V1.89, KSuite V2.06-Full, KSuite V2.08, KSuite V2.10. You are free to install any version of driver as you will.
And the video on how KSuite automatically updates from V1.89 to V2.10, stored in the ksuite V2.10 CD files.
Steps to update
Please Kindly Attention:
1) Do not connect network connections, unable to online update
2) Do not re-install lower version since you verify the newest version working well.
If not do as above two notes, you may get some errors, the solution is as the same as that to add tokens, one word is reflash CPU, then reinstall software one another computer, more details please open folder KSuite V2.06 full to watch the video: ktag J-link V8 ADD tokens
Step – by –step:
1. Disable both Wireless network Connections and Local area connections
2. Open E:\ KSuite V2.10 \ KSuite 2.10, to set up K – Suite
On the way, it pops up a window asking to install Microsoft visual C++ 2005 SPI redistributable, and select language, then finish the installation
3. Ksuite App launch, but get prompt “Connection not established”
Open E:\ copy folder “help” Back to desktop, right click “K-Suite”, click “properties”, click “Find Target”, right click folder “help”, delete it, then right click paste to copy the folder “help” from E:\ to C:\
4. Plug Ktag interface into the computer, and find new hardware on the desktop, step-by-step to finish installing the software for USB device.
5. Open “My Computer” – Computer Management – Device Manager -Universal Serial Bus controllers – USB device, to check whether it has a good establishment between the computer and Ktag interface.
6. On the desktop, open “K – Suite”, it will automatically search software update online, firmware update online…read device info…Updating device…
7. Click car icon
8. Select car detailed inform, including: manufacturer, model, version, type, kw, HP, Fuel, MY, ECU, Mode, FAM, CHK and RD. Then click OK. I.E
BMW 3 Series (E91)
Get an operation tips
Next is to choose between K-line and CAN, then select ID
Get a prompt reading “Warning, please connect your vehicle to a stabilized battery charger in order to use this serial protocol”
Next prompt is reading ” switch on the dash-board, check the connections and press OK to continue”
Starting to communicating
Switch off the dash-board to continue, battery 12.16V
Then Following the instructions for operation