My Shopping Cart
Launch x431SD Connect C4foxwellvvdi2Xhorse VVDI PROGvvdi mb toolktagxtunerBMW FEM BDCkess v2Lonsdor K518ISETECH2
Home
Home - Products - Car Key Programmer - EWS Editor Version 3.2.0 B for BMW
« Go Back
EWS Editor Version 3.2.0 B for BMW

EWS Editor Version 3.2.0 B for BMW

Item No. SK74-B
0 stars, 0 reviews.
Out of Stock
Buy It Now:£57.59
Shipping:
Free Shipping   Standard Flat Rate Shipping Service 
Estimated delivery time: 7-18 working days.See details»
Weight:
0.2KG
Package:
17cm*15cm*2.5cm      ( Inch:6.68*5.89*0.98 )
Returns:
Return for refund within 7 days,buyer pays return shipping.Read details »
This device is designed to work with factory anti-theft system (immobilizer) EWS. Immobilizer EWS has been installed on the for BMW AG vehicles since 1996. Cars such as for BMW 3 series (E46), 5 series (E39), 7 series (E38), X3 (E83), X5 (E53), Z4 (E85) and other vehicles of BMW AG - MiniCooper, Rover 75, Range Rover are equipped with this system.
EWS Editor Version 3.2.0 B for BMW

Product Description:
This device is designed to work with factory anti-theft system (immobilizer) EWS. Immobilizer EWS has been installed on the for BMW AG vehicles since 1996. Cars such as for BMW 3 series (E46), 5 series (E39), 7 series (E38), X3 (E83), X5 (E53), Z4 (E85) and other vehicles of BMW AG - MiniCooper, Rover 75, Range Rover are equipped with this system.
 
USB interface
No AC/DC adaptor required
All modifications of factory immobilizers are supported: EWS1, EWS2, EWS3, EWS3+
Reading and writing of EWS3 and EWS3+ via k-line
Automatic version determination of EWS via reading the memory dump
Adding new keys
Adding used keys (if key’s password is available)
Resetting used keys into a “new” state (if key’s password is available)
Recovery of key's synchronization (matching keys)
Blocking and releasing vehicle access via the specific key
Recovering of coding data (vehicle's specific information)
Changing EWS parameters (product number, date of manufacturing, etc)
Resetting used EWS3 (loading default values)
Changing VIN number which is contained in EWS unit
Changing VIN number which is contained in key (since 1998)
Changing mileage in EWS (contained in EWS since 1998 and on)
Changing mileage in key (contained in key since 1998 and on)
Software creates log-file of read and written keys, which helps to exclude the error of casual blocking key with password, etc.
Possibility of control and recovery of variable part of matching code for EWS and engine control unit DME/DDE
Configuring new transponders PCF7930 and PCF7935 to work with EWS unit.
Supports FSU (Firmware Secure Update) from Internet.
 
Except processors with mask set D47J. EWS unit equipped with this processor has read protection, attempt of reading the processor with this mask set results EEPROM data loss. To recover the data in EWS3 unit with processor (D47J) use the function [ Reset to factory defaults ]
 
Supported cars:
3 series (E46)
5 series (E39)
7 series (Е38)
X3 (E83)
Х5 (Е53)
Z4 (E85)
Range Rover Vogue
Rover 75
Mini Cooper
 
Checking of MOTOROLA processor mask set which is used in some EWS units
Before proceed to reading of EWS data using the function [ EWS Read ]
Read the marking (maskset) plotted on processor (picture):
1. Mask set D47J -old versions of EWS1, EWS2 and EWS3 hw:2 sw:5. Refer to #Recovering of EWS
2. Mask set D46J -new versions of EWS3 and EWS3+. This processor does not contain unpleasant
 
Driver Installation
1. Start EWS_EditorInst.exe file
2. Select installation path. The default path is C: Program Files AvtoTools EWS_Editor
3. Please connect device to USB
4. Install drivers from folder C:Program FilesAvtoTools EWS_EditorDrivers Reading EWS
 
1. Unplug and detach EWS3 unit from the car. Attaching points of EWS3 unit can be found in BM
2. Take the plastic case off from EWS3
3. Connect EWS3 to the socket of the cable for reading/writing EWS3
4. Reassure that in EWS Editor programme type of EWS is switched to Auto
5. In EWS Editor programme select [ Read EWS ] function
6. Programme tries to read contents of EWS3 four times, meantime you must touch test point on the PCB (printed circuit board) of EWS3 with probe (see picture below), hold it on the test point untill reading procedure starts.
7. If the connection established successfully, progress bar appears:
8. Remove the probe off the PCB
 
 
WARNING!!!
1. Selecting wrong test point you may damage or break EWS3 unit! Be very attentive!
2. PCB of EWS3 unit is covered with non-conductive compound, it may lead to poor contact of probe with test point on the PCB of EWS3 unit, and you will be unable to connect to EWS3 unit.
 
Writing EWS
1. Connect EWS3 to the socket of the cable for reading/writing EWS3
2. Perform all the necessary changes
3. Select [ Save EWS ] function in EWS Editor programme
 

Customer Feedback:
 



Shipping method and delivery time:

UK Warehouse Shipping : 2-4 working days , used for items in Stock in UK Warehouse ( UK local address 2-4 working days arrival, other European countries will take about 7-11 working days arrival depend on the place)

DHL Shipping: 2-4 working days, To help you clearance we will help declare a lower price on the invoice help clearance. If address is remote area,customer need pay remote freight or we will ship by Normal Post or Yanwen Express.

UK Express No Tax Way : 5-10 working days ,  special for UK address, declare 20 USD on invoice, No Tax or any other extra fee

Germany Express No Tax Way: 5-10 working daysspecial for Germany address, declare 20 USD on invoice, No Tax or any other extra fee

Yanwen Express: 7-15 working days , usually No Tax for European Countris. Mostly used for Spain, Portugal, and some remote area place.

EMS: 7-15 working days. usually used for customers from Russian, Brazil, Greece , easy clearance.

Flat Post/Normal Post: 7-15 working days usually,some remote place need about 7-25 working days

Aramex: 5-9 working days, usually used for shipping to middle east counries

 

Our Mobile version new online! Directly place an order via Phone! Easier and more convenient! 


Top 10 reasons to choose OBD2shop.co.uk

1.   Five Years History
2.   Professional and Honest
3.   Technology Service
4.   Product Images
5.   Competitive Price
6.   Top Quality
7.   Safe Packaging
8.   Fast Delivery
9.   One Year Warranty
10. After-sales service and Returns policy

 
Our Qualiy Control:
1.  All items are 100% brand new.
2.  Warehouse and Engineers are double checking the device before shipment to confirm the quality and make sure it works perfectly.
3.  Product sent in cushioned envelope or box to ensure safe arrival.

What's the meaning of QC mark?

Every Set of Device from our Company has an unique QC Mark

1. The QC mark means this product passed our Quality Department test
2. The QC mark shows that this is the product from our company
3. The product with the QC mark will get our warranty


 


If you have any questions about the device, the price or the payment,please can contact us for free.

Contact information:

Contact Person: Elyza
Official Email: Sales@obd2shop.co.uk
Skype: OBD2Tool.co.uk
Online service support

Elyza Telephone:  +86 13983755934
What's Your Order Status?
Shipping & Return Information
Billing Terms & Conditions Need Help Immediately?
  • Talks us on Skype or email . We will help you out.
  • Skype: obd2tool.co.uk
  • Email: sales@obd2shop.co.uk
  • TEL: +86 13983755934