KTMflash ECU Programmer & transmission power upgrade tool Support 271 MSV80 MSV90

In Stock. History 10 sold. Item No. SE140

Buy Now: £239.00
Good day :)

Hot Sale UK Warehouse Shipping,Faster, No Tax!

Whatsapp Contact: +86 13983755934
Shipping:
Free Shipping Express Shipping Service    Estimated delivery time: 3-5 Days.See details»
Weight:
0.6KG
Package:
29cm*18cm*6.5cm     ( Inch: 11.39*7.07*2.55 )
Returns:
Return for refund within 30 days,buyer pays return shipping. Read details»

Product Description

KTMFLASH ECU Programmer read & write ECU data by disassembling ECU, also read gearbox data, it reads the ECU data of VAG, Infineon, Bosch, Continental, Chinese types etc.

KTMflash ECU Programmer & transmission power upgrade tool 


Comparison between KTMflash and KTMOBD:

KTMOBD ECU Programmer read & write ECU data via OBD on most Japanese ECU types.
KTMFLASH ECU Programmer read & write ECU data by disassembling ECU, also read gearbox data, it reads the ECU data of VAG, Infineon, Bosch, Continental, Chinese types etc.

More details Please click the Tech Support


KTMflash ECU Tool Descrption:

KTMFLASH ECU Programmer read & write ECU data by disassembling ECU, also read gearbox data, it reads the ECU data of VAG, Infineon, Bosch, Continental, Chinese types etc.
Attention: Please disconnect internet when install and use it.


KTMflash Programmer Functions:

1. Read the Chinese car via OBD.
2. Read the BOOT mode according to the chip model
3. Read the encrypted ECU password (Read the password of encrypted ECU first, then read data)
4. Support cars made in China with ME17 TC1728/1767 for data reading & writting and password reading.


KTMflash Workable Transmission Model:

VAG: DQ200 (0AM) 
VAG: DQ200MQB/G2 (0CW) 
VAG: DQ250C (02E) K-Line 
VAG: DQ250E/F (02E) 
VAG: DQ250MQB (0D9) 
VAG: VL300/V30 (01J/0AN) K-Line 
VAG: VL300/V30 (01J/0AN)
VAG: VL381 (0AW) 
VAG: DQ500 (0BH/0BT) 
VAG: DL501/G2 (0B5) 
VAG: DQ200/MQB Boot (MICRO) 
VAG: DQ200/MQB Boot (EEPROM) 
VAG: DQ200G2 Boot (MICRO) 
VAG: DQ200G2 Boot (EEPROM) 
VAG: DQ250E/F/MQB Boot (MICRO) 
VAG: DQ250E/F/MQB Boot (EEPROM) 
VAG: VL300/V30 BSL (FLASH)
VAG: VL300/V30 BSL (EEPROM) 
VAG: VL381 Boot (MICRO) 
VAG: VL381 Boot (EEPROM) 
VAG: DL501 Boot (MICRO) 
VAG: DL501 Boot (EEPROM)
VAG: DL501G2 Boot (MICRO) 
VAG: DL501G2 Boot (EEPROM)

Read Chinese car via OBD:
China: Chery, Great Wall, Lifan, SAIC ME17 (ME17.8.8) 
China: Chery, Great Wall, Lifan MT80 K-Line Calibration (Delphi MT80)
China: Chery, Great Wall, Lifan MT80 CAN-bus (Delphi MT80)

Read the BOOT mode according to the chip model:
Infineon: TC1762/TC1766 MICRO (1504KB) 
Infineon: TC1762/TC1766 EEPROM (32KB) 
Infineon: TC1792/TC1796 MICRO (2048KB) 
Infineon: TC1796 MICRO+EXT (4096KB/6144KB) 
Infineon: TC1796 EXT (2048KB/4096KB) 
Infineon: TC1796 EEPROM (128KB) 
Infineon: TC1792 EEPROM (64KB) 
Infineon: TC1738/TC1767 MICRO (2048KB)
Infineon: TC1738/TC1767 EEPROM (64KB) 
Infineon: TC1797 MICRO (4096KB) 
Infineon: TC1797 MICRO+EXT (6144KB/8192KB)
Infineon: TC1797 EXT (2048KB/4096KB) 
Infineon: TC1797 EEPROM (64KB) 
Infineon: TC1724/TC1728 MICRO (1536KB)
Infineon: TC1724/TC1728 EEPROM (64KB) 
Infineon: TC1782/TC1784 MICRO (2560KB) 
Infineon: TC1782/TC1784 EEPROM (128KB) 
Infineon: TC1793/TC1798 MICRO (4096KB) 
Infineon: TC1793/TC1798 MICRO+EXT (6144KB/8192KB) 
Infineon: TC1793/TC1798 EXT (2048KB/4096KB) 
Infineon: TC1793/TC1798 EEPROM (192KB) 

Read the encrypted ECU password (Read the password of encrypted ECU first, then read data):
Bosch: Support Chinese car ME17 TC1728/1767 data reading & writing and password reading
Bosch: BMW/MB/VAG GPT 
Bosch: Ford/Opel/Volvo GPT 
Bosch: BMW TPROT8+ 
Bosch: VAG TPROT8+ 
Bosch: Kia/Hyundai/Honda TPROT8+ 
Bosch: Chrysler/Jeep/Dodge/Fiat TPROT8+ [Test] 
Bosch: VAZ/UAZ ME17.9.71  
Continental: Kia/Hyundai/SsangYong SIM2K-24X/C201 
Continental: Ford EMS2204
Continental: Ford EMS2207 
Continental: Ford EMS2211
Continental: Ford SID208 
Continental: Ford SID209 
Continental: Ford Mondeo 4 SID807EVO
Continental: Ford Focus 3/Transit Connect SID807EVO 
Continental: Citroen/Peugeot SID208 
Kia/Hyundai: Delphi MT86 EEPROM (16KB) 
Mercedes-Benz: Delphi CRD3.1 EEPROM (32KB) 


How to use KTMFlASH Switch board?

1. The switch board is designed to work with J2534, this device uses the Ktag cables so the user can refer to the Ktag wiring diagram
2. Advise you use Open Port2.0 as the protocol conversion equipment and work with PC.
3. There are 3 types of Bosch Infineon ECU:
* The Infineon ECU before TPROT8.
* TPROT8-10 
* The Infineon ECU after TPROT10 which is what we call GPT encrypted. 
4. The Infineon ECU before TPROT8 is not encrypted, you directly uses the BOOT point grounding, then follow the Ktag user manual to wire the cable and read the data. 
5. For TPROT8-10, the Bosch Company set the anti-debugging mode, reading EEPROM needs no password and reading Flash needs password. 
Therefore, during the reading process, there is an extra CNF1, Boot outputs low level and CNF1 outputs high level. When reading, Boot needs to add one small resistor and ground it. CNF1 to connect one 470ohm-2K resistance, then connect 3.3V, it's very important, otherwise the ECU will be burnout. 
Two tips on reading the data: 
* BOOT and CNF1 must be connected when reading data. 
* Only connect BOOT not CNF1 When reading the password, otherwise the password can't be read out. Also you can follow the Ktag wiring diagram because Ktag controls the CNF1 turn on and off, so it can't be disconnected. When reading the password, you turn the two switches to the automatic mode, and to the On mode when reading the data, when the software prompts, you choose "Manually" then follow the message to turn on or off.
6. For GPT encrypted ECU, the S1, S2 and Boot cable are needed to connected when reading password, and the S1, S2 don't need to be connected when reading data.


KTMflash software display:

KTMflash software 1

KTMflash software 2

KTMflash software 3

KTMflash software 4

KTMflash software 5


KTMflash Package including:
 
1pc x KTMflash ECU Programmer
1pc x KTMflash USB Dongle

         

            

Shipping method and delivery time:

UK Warehouse Shipping: 2-4 working days, Only item title marked " Ship from UK " will ship from UK warehouse. ( UK local address 2-4 working days arrival, other European countries will take about 5-10 working days arrival depend on the place), We will pay the freight ship to each customer, If customer country does not have Shipping service in our UK warehouse or only have UPS service, customer need pay the UPS freight difference or package will ship from Shenzhen, China.
DHL Shipping: 2-4 working days, To help you clearance we will help declare a lower price on the invoice help clearance. If address is remote area, customer need pay remote freight or we will ship by Normal Post or Yanwen Express.
Yanwen Express: 5-10 working days, usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
 
If you have any questions about the device, the price or the payment, please can contact us for free.
Contact Person: Elyza
Whatsapp: +86 13983755934
Telephone:  +86 13983755934
Wechat:     +86 13983755934
Official Email: Sales@obd2shop.co.uk
Skype: OBD2Tool.co.uk
Online service support

OBD2shop.co.uk

Videos

KTMflash ECU Programmer read TC1796 data for Audi A4 - obd2shop.co.uk

KTMflash ECU Programmer Read VAG DQ200 MQB Boot (EEPROM) - obd2shop.co.uk

KTMflash ECU Programmer Read data for Magotan TC1766 - obd2shop.co.uk

KTMflash ECU Programmer Read and Write Delphi MT80 - obd2shop.co.uk

KTMflash ECU Programmer read Infineon Tricore TC1738 TC1767 Micro

KTMflash ECU Programmer Install Read TC1797 - obd2shop.co.uk

Tech Support


Both KTMOBD and KTMflash can read the chip data, read and write ECU data, but they also some difference.

KTMOBD ECU Programmer read & write ECU data via OBD on most Japanese ECU types.

KTMFLASH ECU Programmer read & write ECU data by disassembling ECU, also read gearbox data, it reads the ECU data of VAG, Infineon, Bosch, Continental, Chinese types etc.


Here comes the comparison table:

 
  KTMOBD KTMFLASH
Image  KTMOBD ECU Programmer  KTMflash ECU Programmer
Read and write ECU data
Read gearbox data
read the chip data
Via OBD or Disassemble ECU via OBD Most need to disassemble ECU
Read the gearbox data on these types Ford
Mazda
Honda / Acura
Nissan
Renault
Subaru
Mitsubishi
China
Toyota
Denso
FusoOthers (a little part): Kia/Hyundai, Chevrolet, 

SsangYong, VAG
VAG: DQ200 (0AM)
VAG: DQ200MQB/G2 (0CW)
VAG: DQ250C (02E) K-Line
VAG: DQ250E/F (02E)
VAG: DQ250MQB (0D9)
VAG: VL300/V30 (01J/0AN) K-Line
VAG: VL300/V30 (01J/0AN)
VAG: VL381 (0AW)
VAG: DQ500 (0BH/0BT)
VAG: DL501/G2 (0B5)
VAG: DQ200/MQB Boot (MICRO)
VAG: DQ200/MQB Boot (EEPROM)
VAG: DQ200G2 Boot (MICRO)
VAG: DQ200G2 Boot (EEPROM)
VAG: DQ250E/F/MQB Boot (MICRO)
VAG: DQ250E/F/MQB Boot (EEPROM)
VAG: VL300/V30 BSL (FLASH)
VAG: VL300/V30 BSL (EEPROM)
VAG: VL381 Boot (MICRO)
VAG: VL381 Boot (EEPROM)
VAG: DL501 Boot (MICRO)
VAG: DL501 Boot (EEPROM)
VAG: DL501G2 Boot (MICRO)
VAG: DL501G2 Boot (EEPROM)
Others   Read the BOOT mode on Infineon;
Read the encrypted ECU password for Bosch / Continental, Kia/Hyundai / Mercedes-Benz
Language English, Russian English, Russian