VCM Rotunda Dealer IDS VCM V86 JLR V135,updated by CD.It mainly works with airbayg,abs,srs,fault code.VCM has two parts software in CD,one is IDS for Ford and for Mazda,another is JLR for Jaguar and for Landrover.
Warranty: One Year
VCM Rotunda Dealer IDS VCM IDS VCM V86 JLR V135
Latest version:IDS: V86 for Ford and for Mazda
For Jaguar & Land Rover: V135 for Jaguar and for Landrover
English; Slovenian; Spanish; Greece; German; Danish; Czech; Chinese(traditional); Chinese( simple);Vietnam; Turkish; Thai; Swedish; Russian; Portuguese; Polish; Norwegian; Dutch; Korean; Japanese; Italian; Indonesia; Hungary; French; Finnish
Software download :
JLR V135 License Free Download
IDS SDD V135 FULL Free Download
IDS VDF J V135 V5 Free Download
IDS VDF L V135 V5 Free Download
IDS SPA V135 V1 Free Download
Main Board Picture:
Ford VCM IDS (VCM) is a high performance,rugged,vehicle serial communications gateway.
This machine can do ford and mazda old and new cars,no year limitation.For jaguar and landrover,it can only do after 2005 year.
This device provides multiple vehicle serial communication interfaces to meet the requirements of all Motor for Ford Company vehicles.
The VCM unit is housed in a magnesium enclosure with a tough,protective,plastic cover for the PCMCIA expansion slot which can,for example,be used for wireless LAN cards or memory expansion.
VCM device contains five LED status indicators to provide the user with a visual mode of internal VCM,vehicle,and host device (e.g. NGS Classic's T-Handle,PC,Pocket PC/PDS,and Laptop/IDS) operation.
VCM also has detachable cables for connection to industry standard high-speed host interfaces as well as to the vehicle under test.The VCM DVD includes both IDS (Integrated Diagnostic Software) and PDS (Portable Diagnostic Software) tools.Diagnostic coverage includes most 1996 2008 MY (produced 1995 2007) Ford,Lincoln/Mercury & Mazda vehicles.
1. Application overview integrated diagnostic software (IDS) is the next generation diagnostic tool.IDS integrates WDS software modified to run on an off-the-shelf laptop with the Vehicle Communication Module (VCM) currently used in NGS+ and PDS,and a new Vehicle Measurement Module (VMM).
2. Vehicle Diagnostic Connectors The VCM 16-pin DLC cable is used to connect the VCM to the vehicle.The VCM and VMM connect to the laptop through the inthernet-USB Adapter Cable (H406/H416).
3. Interface Devices The interface devices that are used with this application are:VCM Vehicle Communication Module:VCM for FORD device provides all link based functionality including:Data logger,self test,Service Functions,Module Configuration and Programming,etc.
It can install IDS software and JLR software on one computer.Through a convert software,can realize software convert from IDS and JLR.It is free update through internet.
It will ask for pin code for ford cars before 2009 when you do key programming.After 2010,it do not need pin code.
VCM requirements on installation:
1.1 Please install IDS and JLR to Local Disk C
IDS software is for FM, and it must be installed to Local Driver C;
JLR software is for Jaguar and Land Rover, and Local Driver C is also required.
Moreover, at least 15G available space is required on your Local Driver C when installing the software.
1. 2 Requirements on computer configuration
Computer memory: at least 1GB
CPU: at least 1GHz
Notebooks (ULPC: Ultra low-cost PC) not allowed
1.3 Requirements on computer USB interface
Every laptop has more than one USB ports, one of them is the MAIN PORT, and others are AUXILIARY PORT, please make sure the USB port works and use MAIN PORT
1.4 Requirements on computer operating system
For computer operation system, please use Windows XP (sp2 or sp3) professional Edition 32-Bit.
Home Edition and other systems are not allowed
1.5. Need install the convert software and follow the instruction.
Note that the application will detect the interface device that is connected to the laptop. Indicator icons will appear at the bottom right-hand corner of the IDS screen when the VCM are connected.
For Ford and For mazda software can not installed on the same laptop
Do not connect to the internet
If there shows any update information,please do not click.Just ignore it(or the device can not work any more)
VCM (Vehicle communication module
16-pin DLC long cable
IDS 4m PC Ethernet-USB host cable
DVD(For Ford/For Mazda)
DVD(For Land Rover/For Jugar)
Shipping method and delivery time:UK Warehouse Shipping: 2-4 working days
, Only item title marked " Ship from UK " will ship from UK warehouse. ( UK local address 2-4 working days arrival, other European countries will take about 5-10 working days arrival depend on the place), We will pay the freight ship to each customer, If customer country does not have Shipping service in our UK warehouse or only have UPS service, customer need pay the UPS freight difference or package will ship from Shenzhen, China.DHL Shipping: 2-4 working days
, To help you clearance we will help declare a lower price on the invoice help clearance. If address is remote area, customer need pay remote freight or we will ship by Normal Post or Yanwen Express.Yanwen Express: 5-10 working days
, usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
If you have any questions about the device, the price or the payment, please can contact us for free.Contact Person:
13983755934Official Email: Sales@obd2shop.co.ukSkype: OBD2Tool.co.ukOnline service support
"VCM Software Update"
A conclusion about Ford IDS VCM frequently asked questions in the terms of outside appearance, compatible car models, version, update, language, installation, and whether Ford VCM IDS supports making keys.
Rotunda Dealer IDS VCM FAQ
Q: When Ford VCM IDS JLR is installed, it prompts to update VCM software.
A: VCM Software Update:
VCM has two pieces of CD, one is for IDS software, another one is for JLR software, and they separately update. Once the newest software release, we will announce you the download link or send you CD if needed, please download and setup by following the next update steps:
1). Enter IDS (Ford and Mazda),
2). Open the folder stored with update software;
3). Close IDS software;
4). Run IDSPatch.exe in the IDS-License Software;
5). Update ok, click exit;
6). Supply power for Ford VCM main head;
7). Connect Ford VCM with the computer;
8). Open the software, click to update;
9). "Update", then click "OK".
VCM IDS Update File
1). Convert service to JLR (Jaguar & Land Rover);
2). Close JLR software;
3). Open the JLR-License Software to run JLR License.EXE
4). Update ok, click exit.
VCM Firmware Update:
When you get message to update firmware, click "update" with disconnecting to the network.
About VCM Installation and Windows Operation System
Q: My computer drive (C:) is only 6G memory available. Can I install Ford VCM software to the drive (D:)?
A: No, you cannot. IDS software and JLR software need to be installed to Drive (C:) and at least 15G memory available.
Q: When I use VCM V79, a picture appeared prompting me to update VCM and then I update for one hour, never finish.
A: ignore it.
Q: VCM prompt “License is only 2 days left”, it suggests me the VCM won’t work after 2 days later?
A: Install the license software in the VCM CD, after the License software is installed VCM will go on work.
Q: the VCM and IDS I buy are from two different sellers, can I use them together?
A: No, better use the VCM and its matching IDS from one same seller. Maybe the VCM and IDS version from different sellers is not the same and it is possible to damage the device if they work together.
Q: VCM software includes Ford & Mazda IDS, Jaguar & Land rover (JLR), Can they be installed on the same computer?
A: Better install them on two different computers, we have some customers who tried to install on the same computer, but failed.
Q: Rotunda Dealer IDS VCM fails to communicate, the indicator light is red, is the device broken?
A: There are 3 possible reasons: 1) Make sure the software is installed successfully and License need to install. 2) Well connect the cable between VCM and the car. 3) Check whether the VCM local area connection RTL8150 is connected, whether the packet “sent” and “received” is changing.
Q: I need Spanish VCM, do you have?
A: When the VCM is installed, it is multi-language available to select: English, German, French, Italian, Spanish, Netherlands, Swedish, Danish, Norwegian, Portuguese and Slovak, but after the software is installed, the language can’t be changed, unless the software is reinstalled.
Q: When the JLR software of VCM is installed, it needs username and password, how to solve (see the picture)?
A: there are 2 possible reasons: 1) the license is not installed 2) the license is installed, but it still needs username and password, check whether your computer windows system is compatible with JLR software, JLR software requires Windows XP(sp2 or sp3) professional Edition 32-Bit, Computer memory: at least 1GB, CPU: at least 1GHz, Netbooks (ULPC:Ultra low-cost PC) not allowed
Q: I have two questions about Mazda and Jaguar. One: do they need to install License? Two: what is the password calculator written on Ford CD use for?
A: yes, Mazda and Jaguar need install License. The password calculator written on Ford CD is used to calculate Incode when the VCM is used to make key
Q: When Ford VCM is installed, error message displays “Crack failed”
A: Crack fails means license fail. When the license is installed, the anti-virus software should be uninstalled, only after the VCM software is installed can the license run. After you install successfully the VCM IDS software, reboot the computer, then install the license, finally open the VCM software, if the VCM IDS software is opened, the license can’t be installed.
Q: I install all the software on the license patch, when I open IDS license file, it can’t be used, an error message reading “Windows cannot access the specified device, patch, or file. You may not have the appropriate permissions to access the item”.
A: this error suggests that the patch can’t work. Since the VCM software
isn’t compatible with your computer, advice you use Windows XP
professional. And when the VCM PATCH runs, the installed VCM software can
’t be opened.
Q: The VCM programming menu lost, what to solve?
A: Please contact us to send you file “ExtendProgramming” file to reset.
Q: When the VCM is installed, Error “Unable to continue. Contact the Technical Service Hotline. Press X to exit”
A: If you use the Ford VCM (item NO. SP10-B) license to install with the once sold VCM, then you need to reinstall the computer operation system and reinstall the VCM software.
About Supported Car Models and Supported Function
Q: Can I use Ford VCM to change VIN.
A: yes, Ford VCM supports changing VIN. But it requires you are skilled in changing VIN.
Q: Does Ford VCM support PCM initialization for Mazda RX8 2006?
A: yes, VCM support PCM initialization for Mazda up to 2010.
Q: Is your VCM with VMM?
A: No, our VCM isn’t with VMM.
Q: I'm searching device to encode and password pulling cars like the Volkswagen Jetta 2011 and 2012 that saw you which device would sell and what would be the value? And appliance pulls which encrypts the password and the goal generation 6 2013?
A: VCM doesn’t support ECU programming; please contact us for remote assistance. When use VCM to read data stream, you are only allowed to choose 1 to 3 options, choose more will lead to the computer freeze up.
1. Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up this item software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our this item software is completely safe and virus free and all other virus scanners confirm this.
If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.
2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.