Launch X431 Creader VII+ (CRP123) supports all 10 test modes of the OBD, it comprehensive diagnostic instrument is applicable for all vehicles which match OBDII standard after 1996.
Update: Online Update,no need activation,no need to buy software
Launch X431 Creader VII+ (CRP123) Comprehensive Diagnostic Instrument
Top 4 Reasons to Buy Launch Creader VII+:
1. Support Language: English, French, Spanish, German, Italian, Russian, Chinese
2. Creader VII+ Can Replace CRP123 Definitely in Functions
3. Supports over 20 car models and 4 systems (ABS, Airbag, Transmission and ECU)
4. Support Online Upgrade, no need activation,no need to buy software
X431 Creader VII+ Description:
Creader VII+ is a well built comprehensive diagnostic instrument by Launch. It’s not only including the full function of OBDII /EOBD, but also support more functions of four systems (Engine, automatic transmission, anti-lock braking system and airbag)of main car models, such as read and reset code, multi-languages, data stream graphic display, storage and playback of dynamic data stream, etc.
Launch X431 Creader VII+ Support Car Models:
1. Asia Car Models:
Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Hyundai, Kia, Subaru, Infiniti, Lexus, Accura, Isuzu.
2. USA Car Models:
Ford, GM, Chrysler.
3. European Car Models:
Benz, BMW, VW, Opel, Volvo, Fiat, Landrover, Seat, Skoda, Audi, Porsche, Saab, Jaguar.
X431 Creader VII+ Functions:
1. Applicable for all vehicles which match OBDII standard after 1996II
2. Supports all 10 test modes of the OBD
3. Display DTC help information and service information
4. Oxygen sensor test, carbon canister test
5. OBDII Data Stream Graphic Display
6. Cover more than 20 main car models in America, Europe and Asia Pacific regions
7. Can test Engine, Transmission, ABS and Airbag systems
8. Read DTC
9. Clear DTC
10. Read Dynamic Data Stream
12. Support Online Upgrade
Launch X431 Creader VII+ Parameter:
||3.5 " TFT LCD Display
|Input Voltage Range
||16 - PIN DLC
||0 ~ 50oC (0oF ~ 122oF)
||-20 ~ 70oC (-4oF ~ 150oF)
|X431 Creader VII+ Update and register:
Step 1: visit http://mycar.x431.com/pad/landingPageIndexCrv.action and click icon "Update Tool Download".
Step 2: Download and install "Launch Creader Update Tool ", after installation is complete, run it.
Step 3: in the following picture, select Language (English, Chinese, French and Spanish available) and input product Serial Number (the serial number is in the back of Creader VII+ /Creader VIII)
Step 4: click "Update" to enter the registration page, input Email and Register Code, click "Submit".
Note: if you need Register Code, please refer to step 5 to step 8; if you already have Register Code, after submit, skip to step 9.
Step 5: the register code can be found in the Creader VII+ / Creader VIII, how to find? Connect one end of the USB cable to Creader VII+ / Creader VIII,
and another end to the computer.
Step 6: Wait until Launch Creader enter the main menu, then Move the mouse pointer to the "Help" icon, finally press the "OK button.
Step 7: select " Tool Information ", then press button "OK"
Step 8: the register code shown below is the one needed to enter in the step 4.
(Back to step 4 to input register code and continue)
Step 9: insert TF card into TF card reader, then insert the TF card into the computer.
Step 10: restart the "Launch Creader Update Tool ", select the file you need or click "All", then click "Download" to start the download.
Step 11: After complete download, take out TF card from TF card reader and insert it into the slot of Creader VII+ / Creader VIII, then supply power for Creader VII+ / Creader VIII by the USB cable (one end of the USB cable connect to Creader VII+ / Creader VIII and another end to the computer) or by the vehicle diagnostic socket (connect the OBDII connector of Creader VII+ / Creader VIII to vehicle diagnostic socket ), after the Creader starts, it popup a window prompting " System Upgrade- Sure Upgrade?", select " OK " to upgrade
Step 12: update complete!
Shipping method and delivery time:UK Warehouse Shipping: 2-4 working days
, Only item title marked " Ship from UK " will ship from UK warehouse. ( UK local address 2-4 working days arrival, other European countries will take about 5-10 working days arrival depend on the place), We will pay the freight ship to each customer, If customer country does not have Shipping service in our UK warehouse or only have UPS service, customer need pay the UPS freight difference or package will ship from Shenzhen, China.DHL Shipping: 2-4 working days
, To help you clearance we will help declare a lower price on the invoice help clearance. If address is remote area, customer need pay remote freight or we will ship by Normal Post or Yanwen Express.Yanwen Express: 5-10 working days
, usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
If you have any questions about the device, the price or the payment, please can contact us for free.Contact Person:
13983755934Official Email: Sales@obd2shop.co.ukSkype: OBD2Tool.co.ukOnline service support