Low Cost V4.94 Digiprog3
1.It is a cost-effective mileage correction tool,
2.supports multi-language and full range of vehicle.
3.V4.94 digiprog 3 is latest version of Digiprog3, add more car models on the basic of V4.88.
Low Cost V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit
Top 4 Reasons to Get Low Cost V4.94 Digiprog 3
1. Latest Version: V4.94
2. This is newest version Digiprog3 with most competitive price.
3. With ST01 ST04 Adapter in the Package
4. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands
Please Kindly Notice:
1. Power-On Password: 1
2. If you want to upgrade your digiprog 3, need to return the main unit for upgrading
V4.94 Add Model List:
For Audi :
-A3 new version
-W176 new version
-W204 new version Diag
-W212 new version Diag
-Insignia new version
-Astra new version
V4.93 digiprog 3 odometer programmer:
For Audi :
A3 Diag new version
A6 Diag new version
A8 Diag new version
For Mercedes :
R 172 Diag new version
R 231 Diag new version
W 212 Diag new version
For Ford :
For VW :
Amarok Polo Johnson
Digiprog 3 V4.94 Features:
1. Service interval adjustments and settings
Fault memory read-erase
Integrated PC communication
Some Important Tips for Using Digiprog 3:
1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned 4. completely as the solvent can damage the clips.
Digiprog 3 Menu:
1. EEPROM Menu
The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.
2. CAR/TRUCK Menu
This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.
3. Motorcycle Menu
This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.
4. Special Functions Menu
The special functions menu is for use only by official DigiProg dealers.
5. Setup Menu
This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.
Using the EEPROM Menu:
On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started. The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.
1pc x Digiprog3 Main Unit
1pc x OBD2 Cable
1set x Cables and Adapters
Digiprog 3 Newest Software Display:
What car models can Digiprog 3 work on?
According to one of our customer , here is the detail Test information:
1.Just done a Mercedes 204 and 212 diagnosis, mileage and assyst processing, the tool worked alright. The mileage correction just took less than 1 min.
2.Tested on Citroen c2, ok
Ford Galaxy 04 plate, ok
Ford Mondeo 04, ok
VW Golf MK 5 06, ok
3.I have tried and tested my DP3 (Digiprog 3) on Mercedes 204 212, worked great.
4.BMW E46 by 20 pin DLC work ok year 2000
Mercedes 2008 by OBD work, dash only!
Nissan Cascai 2008 by eeprom direct working
5.I did Mercedes Benz w204 2010, w212 2011. 2 min job done. Worked very good.
6.Tested on 211 2008 work with flashing option(block Syncro with EZS in dash flash)
7.2009 Insignia done today via OBD OK
2009 Audi R8 done OK
2009 Insignia done OK
8.Tested on VW Jetta 2007 and Chevrolet Malibu 2008, OK.
9.I only got the machine this week, the cars I have tried up to now have worked all the eeprom of Audi A4 09 diag, 2011 Ford Focus diag, Peugeot E7 BSI and dash, Fiat Doblo diag, Honda Accord, Peugeot 407 06, Peugeot 406 bsi and dash.
10.Audi a4 2008 …. by obd 30min job
Audi a6 2004…. not from first try but ok (q7 the same )
Audi a3 2003…. obd 1min job
Shipping method and delivery time:UK Warehouse Shipping: 2-4 working days
, Only item title marked " Ship from UK " will ship from UK warehouse. ( UK local address 2-4 working days arrival, other European countries will take about 5-10 working days arrival depend on the place), We will pay the freight ship to each customer, If customer country does not have Shipping service in our UK warehouse or only have UPS service, customer need pay the UPS freight difference or package will ship from Shenzhen, China.DHL Shipping: 2-4 working days
, To help you clearance we will help declare a lower price on the invoice help clearance. If address is remote area, customer need pay remote freight or we will ship by Normal Post or Yanwen Express.Yanwen Express: 5-10 working days
, usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
If you have any questions about the device, the price or the payment, please can contact us for free.Contact Person:
13983755934Official Email: Sales@obd2shop.co.ukSkype: OBD2Tool.co.ukOnline service support