The New OBD2 Mileage Correction Tool can support the 2015-2017 Mercedes-Benz. It is no wiring required via the OBD2 interface, also it is no filter required if the operation is performed by wiring.
New OBD2 Mileage Correction Tool for 2015-2017 Mercedes Benz
Benz Mileage Correction Tool Features:
1. If operating through the OBD2 interface, no wiring is required. No filter is required if the operation is performed by wiring.
2. Support the 2015-2017 new Mercedes-Benz.
3. No filter; Not change meter; Security.
List of supported chassis:
W213: 2015~2017 (to be upgraded) before 2015, you need to add a filter.
How to use Benz instrument calibration tools:
Open Mercedes Odometer Correction Software;
First, you must ensure that the vehicle battery is sufficiently charged. The process takes 30 to 60 minutes, so the vehicle must be fully charged!
The information display interface contains instructions for the entire procedure.
1. First, use the <1 OBD Read Config Info> option to get the vehicle configuration information;
2. Then remove the meter, follow the picture to the wire, and program the MCU with the <2 MCU Data Programming> option;
3. Then reinstall the meter and write the vehicle configuration information with the <3 OBD Write Config Info> option;
4. And finally, use the <4 OBD Read Mileage> and <5 OBD Write Mileage> options to read and write the kilometers.
Note: Modifying the kilometers again is only required to operate in <4 OBD Read Mileage> or <5 OBD Write Mileage> steps!!!
Please kindly Note:
1. <1 OBD Read Config Info> and <2 OBD Write Config Info> communication takes 15-30 minutes, Please make sure the vehicle battery is sufficient!
2. Before operating <2 MCU Data Programming>, Please confirm whether the meter is 8-drive or 11-drive.
When you start step 1, the following prompt may appear:
If Odometer Correction is supported, here are the tips: Make sure the vehicle battery is sufficient.
If Odometer Correction is not supported, here are the tips: For cars before 15 years, you need to add a filter, and then you can operate steps 4 (OBD read kilometers) and steps 5 (OBD write kilometers); cars after 17 years do not support Odometer Correction temporarily.
Take the calibration process of the Benz 205 chassis instrument for 16 years as an example:
Step 1: OBD Read Configuration Information
Configuration data must be saved after successful reading!
Step 2: MCU Data Programming
At this time, you need to remove the back cover of the dashboard, select the type, and select the wiring method according to the type.
You can open the wiring diagram directly, there are 5 wires in total(as the picture). The meter is divided into 8-drive and 11 drive. Please confirm whether the meter is 8-drive or 11-drive.
After connecting the wires according to the wiring diagram, perform the operation.
If the MCU data is edited successfully, the wiring can be removed.
Step 3: OBD Write Configuration Information
The configuration information is the data read in the first step, and you can select the saved data at this time;
Then you can get the prompt that the vehicle configuration information is written successfully
Finally, you can adjust the mileage
Use the <4 OBD Read Mileage> and <5 OBD Write Mileage> options to read and write the kilometers.
For example, we wrote the mileage of 12345; Then read it out is 12345km.
Look at the dashboard again, the kilometers are correct! The steps are complete!
Benz Odometer Correction Tool Package:
1pc x OBD2 Odometer Correction Tool
Hot Branded Products:
Shipping method and delivery time:UK Warehouse Shipping: 2-4 working days
, Only item title marked " Ship from UK " will ship from UK warehouse. ( UK local address 2-4 working days arrival, other European countries will take about 5-10 working days arrival depend on the place), We will pay the freight ship to each customer, If customer country does not have Shipping service in our UK warehouse or only have UPS service, customer need pay the UPS freight difference or package will ship from Shenzhen, China.DHL Shipping: 2-4 working days
, To help you clearance we will help declare a lower price on the invoice help clearance. If address is remote area, customer need pay remote freight or we will ship by Normal Post or Yanwen Express.Yanwen Express: 5-10 working days
, usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
If you have any questions about the device, the price or the payment, please feel free to contact us.Contact Person:
13983755934Official Email: Sales@obd2shop.co.ukSkype: OBD2Tool.co.ukLive-Chat: Online service support