5.5" LED OBD-II HUD Head Up Display Over Speeding warning/speed/Km rpm/shift light/temperature S5

Item No. HUD07 Out of Stock.

Buy Now: £54
Weight:
0.3KG
Returns:
Return for refund within 7 days,buyer pays return shipping. Read details »

Product Description

5.5" LED OBD-II HUD head up display over speeding warning/speed/Km rpm/shift light/temperature S5
5.5" LED OBD-II HUD head up display over speeding warning/speed/Km rpm/shift light/temperature S5

Please kindly Attention:
This device used for cars after year 2003 , and your cars need have OBD2 Port
 
New 5.5" LED HUD Features:
 
1. Screen: 5.5"                                                  
2. Plug and play                                             
3. Apply to : Any cars with OBD II interface             
4. Auto on and off                                             
5. Clear brightness display in daytime                              
6. New function : Drowsy driving indicator reminding , driving time  this time , km this driving, average fuel comsumption  this driving, detect fault code and clear fault code              
7. Three mode: idle mode, cruise mode,information  of this driving                      
8. Can detect fault code and clear the fault code.
9. Fuel consumption showed is average  


 
Technical Parameters
isplay information Speed, Unit marks: V-voltage,°C-degree celsius,°F- degree fahrenheit, KM-kilo meter, MPH-Mile, KM/H-kilo meter per hour, Battery voltage, Engine revolving speed icon, Rotation speed, Light sensor, Engine failure icon, Buzzer mark, Fault code, multi-functional display area, Engine revolving speed unit, instant 100KM/instant fuel consumption unit, Drowsy driving indicator reminding, Overspeed reminding, Setting status indicator, Water temperature
Display Alarm Speed alarm, Water temperature alarm, Shift reminding
Environment Temperature -40°C-80°C at atmospheric pressure 86-106KPa
Alarm sound level >=30db
Working voltage 9v-16v DC(120vdc/400mA)
Product Size 120*80*10mm
Product weight 77g
Color box size 168*130*45mm
Preparation Before Installation and Use
 
1. Know the type of your vehicle. , only when the type of your vehicle meets the OBDII standards, can the HUD be normally used on your vehicle. Open the engine hood and find the paster below it (see the picture below), if it has words like OBDII CERTIFIED, then HUD can be installed. Check if there is a test diagnostic communication link (TDCL) under the steering wheel. (Most of the vehicles produced later than 2006 in China have been equipped with a TDCL)


2. Find out the 16 pin diagnostic link (see the picture below) of the vehicle and connect it well with OBDII connecting line. As different types of vehicles have different positions for diagnostic link and some are relatively narrow, patch cord can be purchased.


 
3. OBD interface Put the give-away non-slip mat at the flat place in front of the navigation bridge, and then you can place the host machine of HUD on it and adjust its location at any time.
4. The reflecting film should be pasted right above the H101 host machine and it should be able to reflect to the screen of the host machine..
 
Methods of pasting the film:
 
A. Uniformly water the place where the film will be pasted on ;
B. Rip off the covering layer of the film , and water both sides of it , and paste it to the right place.
C. After you have adjusted the location well, you can use a scratch board or something else flat to slick the film and squeeze the water inside out until there is no bubble or water in it.
D. A few minutes later, the moisture inside the film totally evaporates , then you can finish this by wiping away the water and dust around.
 
Package including:
 
1pc x Host machine of HUD
1pc x Reflecting film
1pc x OBD2 Connecting line
1pc x Instruction Manual
1pc x Non-slip mat
1pc x Warranty card 


Hot Branded Products:

xhorseautellaunch x431cgdithinkcar
xtoolvxdiagyanhualonsdorobdstar

Shipping method and delivery time:

UK Shipping: No Tax, 2-4 working days arrive. Used for products title marked " UK Ship " and UK local customer

EU shipping: No Tax No VAT, 3-5 working days arrive. Used for products title marked " EU Ship " and from EU countries
Note: If the destination does not belong to the EU, might need clearance

Royal Post from China : No Tax, around 7 days arrive . Used for customers from UK and Germany and  UK/EU warehouse no stock.

Yanwen: No Tax 7-14 working days arrive, ship to all over the world, mainly for UK/EU warehouse no stock
Our company is applied with IOSS, declare under 150 EUR, seller pay tax, customers no need to pay tax/vat, usually no tax no extra fee
but for Portugal or Spain customer, please tell us how much to declare.


DHL: Has tax, need to clearance, 3-5 working days arrive. Used for UK/EU no stock, customer requests need a product fast, products ship from Shenzhen, China.

 
If you have any questions about the device, the price, or the payment, please feel free to contact us.
Contact Person: Elyza
Whatsapp: +86 13983755934
Telephone: +86 13983755934
Wechat: +86 13983755934
Official Email: Sales@obd2shop.co.uk
Skype: OBD2Tool.co.uk

OBD2shop.co.uk