This Tool is a frequency sweeper with 5V square wave output (Duty cycle 50%, effective frequency range from over 10kHz (max 50kHz) to 50Hz) .This tool can be also considered as a MCU version of the software TMS-374 Decoder ECU. The only difference between the two tools is that the MCU version works without a PC.
This is a full set of BDM adapters for K-TAG/KESS /KTM/Trasdata chiptuning tool.
KTM bench boot can read and write ECU via Boot & Bench (no need to open the cover), it is a cheap alternative compared with the expensive original one.
V7.020 KTAG ECU Programming Tool Master software V2.23 with Unlimited Token
Available Protocols: BDM MOTOROLA MPC5xx
Easy to use, automatically recognize ECU model, high stability.
Multi-Language available:Italian Deutsch English French Portuguese Spanish
Renolink is a professional programming device for programming electronic control units in Renault and Dacia vehicles, including new models recently produced.
Renolink has many features like UCH matching, airbag programming, engine ECU programming, key coding, key deletion, dashboard coding, eprom and flash reading and writing in Renault and Dacia vehicles.
Online Version Kess V5.017 with Red PCB Support 140 Protocol No Token Limited
KWP 2000 Plus ECU REMAP Flasher Tuning Tool can read and analyze current ECU software,upgrade the ECU software with a re-mapped file,and repair ECUS with software problems or corruption.
XPROG-M V6.12 XPROG M Programmer with USB Dongle
No operation system limitation, software can be in stalled on Windows XP, windows 7
This is the only version XPROG-M can decypte new version BMW CAS4.
New UPA USB Programmerfor 1.3 Version Main Unit for Sale
MB CAN Filter 8 in 1 for W221 W204 W212 W166 and X166 W172 W218 W246
FG Tech Galletto 4-Master V54 BDM-OBD is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum. This item cannot only work as fgtech galletto 4-Master, but can also work for BDM-OBD.
MultiFlasher is a chip tuning software intended for reading/writing FLASH and EEPROM memory of ECUs. It can use any adapter supporting J2534 standard, e.g. OpenPort 2.0 by Tactrix. Before flashing and after reading the program checks the firmware and checksums, and corrects them if needed. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. It contains a function of errors reading, decoding and reset with a possibility to manually add and edit their description.
OBD2shop.co.uk newest arrival Original Xeltek USB Superpro 610P Universal Programmer
NitroData Chip Tuning Box for Benzine Gasoline Cars
NitroData Chip Tuning Box is equipped with connectors identical to those used by the manufacturers. allows for a fast and efficient connection, without cutting of cables or welding. So, if you wish to take out the additional unit, you can do so by using simple plugs.
It leaves no trace on the engine, or in the computer memory of the vehicle.
New Upa-usb is the full set with all adapters, The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.
Main unit of Carprog full V10.93, do not contain any cables.Is for those customer whose main unit broken, can directly buy a new one to replaceit.
Elyza from www.OBD2shop.co.uk provide you best price, high quality items and one year warranty with free technique services.
MCU controlled Interface for Carsoft 6.5 which is compatible with the original interface. Fully digital line switchings and MCU controlled service reset timing.