Plug and Drive NitroOBD2 Chip Tuning Box for Benzine Cars
35% More Power, 25% More torque
NitroOBD2 is a Plug&Drive Ready device to function the increasing the performance of engine.
NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996.
OBD2shop.co.uk The For BMW CAS4 CAN-filter is a special module which allows to adjust mileage readings in BMW F01, F07, F10 and X3 2011-2012 (with motorola processor 9S12 XEP mask 5M48H / 4M48H – SC 66 7095 CAG).
MC68HC11 Programmer communication with PC via a serial port ,it is easy to use Windows 98/ME/XP software In-circuit/On-board.
NitroData Chip Tuning Box for Motorbikers is a power box for bikes, with box you can get more power & torque for your bike. Power and Torque add 30%, Fule saving 10%.
A1 Cable for CARPROG FULL V7.28
OBD2shop.co.uk the micronas/Fujitsu programmer 2.0 for Audi and for VWreplace the R200 and R250 fully function
D80D0WQ ERASER/Programmer was used to Read, Program, Erase Incremental Registers\EEPROM. Compatible with Windwos 98/2000/XP
Filter the km synchronization command between the cluster and the EZS module . This is the only way for the correction of w221 and w164 new models
BDM FRAME with Adapters Set Fit original FGTECH
The MC68HC705B16 programmer supports programming of Motorola 68HC05Bxx, 68HC05Xxx microcontrollers internal EEPROM - most used programmable device in car radios, automotive computers (dashboards, AIRBAG, immobilizers).
OBD2shop.co.uk Plug and Drive EcoOBD2 Economy Chip Tuning Box for Benzine 15% Fuel Save
Less Fuel and Less Emission
EcoOBD2 is a Plug&Drive Ready device to function the reducing fuel consumption for the economy and lower emission for the world.
EcoOBD2 is easy to install. Just plug it into the OBD2 connector of cars. EcoOBD2 fits all car from the year of 1996.
MPPS V13.02 Chip Tuning
The modern interface that allows read and write memory from the car computer via the diagnostic connector.
Latest EU Version V54 FGTech 0475 Galletto 2 Master is the unlocked version, it supports online operation, adds many more vehicles and ECU protocols newer than FW 0386.
Vagtacho USB Version V 5.0 VAG Tacho For NEC MCU 24C32 or 24C64
Online Version Kess V2 Firmware V5.017 support online service, can work with internet, no tokens need, newly add 140+ protocols Add more 7400 Vehicles! program safer and more stable!
Renolink is a professional programming device for programming electronic control units in Renault and Dacia vehicles, including new models recently produced.
Renolink has many features like UCH matching, airbag programming,engine ECU programming, key coding, key deletion, dashboard coding, eprom and flash reading and writing in Renault and Dacia vehicles.
Online Version Kess V2 Firmware V5.017 support online service, can work with interent, no tokens need, newly add 140+ protocols. program safer and more stable!
Iprog Pro is a powerful tool can replace Carprog Digiprog 3 Tango for car repair on the airbag, dashboard, car radio, ecu, EEPROM, immo, MCU, and special functions.
Xprog box latest version 5.84 comes with new authorization - AUTH-0028-1 Renesas V850 and AUTH-0028-2 Renesas SuperH
Kess V2 Latest Version: software ver. 2.37 firmware ver. 4.036
Support much more ecu types than old versions.
Unlimited token version.
CANNOT connect to the Internet.