V2019.12 ECOM for BENZ ECOM Support Diagnostic Programming with HDD software and Dongle
ECOM for BENZ ECOM Support Diagnostic Programming with HDD software and Dongle
Top 5 Reasons to Get BENZ ECOM:
1. Support DOIP, work on latest Mercedes to the year 2019
2. Support Vediamo and DTS Engineering
3. with 256GB SSD Software in the package with free activation
4. Support XENTRY ( ECOM Firmware can not support DAS)
5. Warranty: 2 Years
ECOM is the diagnostic and swipe communication interface used by Daimler-Benz's production and r&d department. It supports the after sales diagnostic software Xentry, Vediamo, and the Monaco DTS, the exclusive development software, with higher access rights than SDconnect C4.
ECom supports the CAN/DoIP network, which CAN be used for the diagnosis and brushing of new car audio and video entertainment systems. Vediamo for Mercedes engineers is an engineering software used by Mercedes engineers to develop diagnostic software, that is, Xentry and DAS now in use is developed based on Vediamo and delivered to general after-sales dealers. For this reason, using the Mercedes super engineering version is open to all diagnosis /coding/retrofit/flashing programming features. It is possible to add or reduce SA codes freely without going through VEDOC(the process of the original factory applying for modifying the equipment code), so as to achieve the purpose of modifying the vehicle equipment, such as adding SA500 electric rearview mirror.
Xentry and DAS Developer mode, commonly known as: exploit data engineering version after 2010, has added many restrictions on functions. Therefore, people may encounter that the vehicle version is too new to enter the control unit, or they cannot make any special modifications after entering the control unit. For example, the w204/212 2012 meter may need to be configured in the regional language, or turn on other convenience functions.
The database of diagnosis /coding/retrofit/flashing for the Mercedes engineer version USES the Xentry database, so the Mercedes engineer version is dependent on the Xentry version. As long as the database is new, the Mercedes engineer version can use the V4.00 version on the new model, and compact3 & SDconnect does not support the ODX document. The latest V5.00 supports ODX files with eCom. It is recommended to use eCom with DoIP function, which is faster and more stable.
ECOM for BENZ ECOM Functions:
1. Perfect DoIP/CAN communication.
2. Quick Test: Quick test of the whole vehicle ECU, you can choose to edit more functions at the same time.
3. Variant Coding: With variant code to add VO-delete VO function.
4. Identification: One-click to read all module programming numbers of the entire car and save.
5. Complete Variant Coding:Read all ECUcoding data of the vehicle at one time, can be written to the vehicle again, completely offline operation.
6. Diagnostic Services: Advanced function see the internal and external data of the module you choose, turn on the computer authorization (not the driving authorization), activate the ECU, reset the ECU, modify the original chassis number.
7. Flashprogramming: Achieve complete offline programming.
8. Diagnostic Trouble Code: Diagnostic module DTC .
9. ECU Exchange: Two identical ECUs exchange .
10. Automatic performance:Automatically activate dts Monaco 8.14 software when connected to the device.
ECOM for BENZ ECOM Information:
Perfect support programming coding
Retrofit folding mirror
Airbag unlock
Turn off the start and stop function
Opencorner auxiliary light
Keyless entry modification
Turn off the engine fault light
Turn off the seat belt sound reminder
Change the ESP computer chassis number
Daytime running lights lit at night
Add original atmosphere lamp
Low with headlights upgraded with high headlights
Add folding mirrors
Add seat memory
Add reversing image
Change the host boot screen
Open sound and light synchronization
Turn off the seat belt sound reminder
Cancel driving to watch DVD
Change the blinking frequency of the turn signal
Cancel the urea system
Urea Alarm Solution*************
Original high-quality power chip Correct identification voltage.
ECOM for BENZ ECOM Manual:
ECom supports the CAN/DoIP network, which can be used for the diagnosis and brushing of new car audio and video entertainment systems.
Xentry and DAS now in use is developed based on Vediamo and delivered to general after-sales dealers.
So, it’s possible to use Mercedes super engineering software Vediamo for diagnosis, coding, programming, retrofitting.
It is possible to add or reduce SA codes freely without going through VEDOC(the process of the original factory applying for modifying the equipment code),
so as to achieve the purpose of modifying the vehicle equipment, such as adding SA500 electric rearview mirror.
Benz ECOM Doip Package includes:
1PC x Benz ECOM Doip Diagnostic & Programming Tool
1PC x OBD CABLE
1PC x USB CABLE
1PC x 256G SSD(DTS 8.14) Hot Branded Products:
Shipping method and delivery time:
UK Shipping :Tax Free, 2-4 working days. Used for products title marked " Ship from UK " and UK local customer
EU shipping: Tax Free, 3-5 working days. Used for products title marked " Ship from EU " and from EU countries Note: If the destination not belong to EU, might need to clearance
Royal Post and Germany DHL shipping :Tax Free, around 7 days. Used for customers from UK and Germany and UK/EU wrehouse no stock.
Yanwen :Tax Free, 7-14 working days, ship to all over the world, mainly for UK/EU warehouse no stock
DHL :Has tax, need to clearance, 3-5 working days. Used for UK/EU no stock, customer need product fast, products ship from Shenzhen,China. If you have any questions about the device, the price or the payment, please feel free to contact us. Contact Person: Elyza Whatsapp: +8613983755934 Telephone: +8613983755934 Wechat: +8613983755934 Official Email:Sales@obd2shop.co.uk Skype: OBD2Tool.co.uk Live-Chat:Online service support
Videos
How to use ECOM to do diagnosis on Benz E320L - obd2shop.co.uk
How to use ECOM DoIP DTS Monaco 8.14 Programming and Coding