Xprog box latest version 5.84 comes with new authorization - AUTH-0028-1 Renesas V850 and AUTH-0028-2 Renesas SuperH
Latest XPROG-M V5.84 with USB Dongle
Top 4 Reasons buy Latest XPROG-M V5.84:
1. Software version: 5.84, Firmware version: 4.4
2. With USB Dongle, NO need activation
3. Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
4. Language: English
Tips for using XPROG-M V5.84:
1. DO NOT use this newest dongle to update the older version Xprog to V5.84
2. Close anti-virus software on your computer; otherwise, X-prog software would be killed.
3. Disconnect the internet; otherwise, the hardware would be damaged.
4. Uninstall the old version of xprog before you install V5.84 software we provide, because our xprog-box hardware is not compatible with newer or older software; otherwise, the hardware will be damaged and will lose its warranty...
5. Never try to UPDATE for the hardware will be damaged if you want to try to update it online, then you will lose its warranty.
6. Xprog v5.84 default software CD does not have EEPROM capabilities which are different from previous version V5.74/5.60/5.55 etc
But the new v5.84 software has modified the software to enable EEPROM reading.
XPROG-M V5.84 Authorizations:
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).
AUTH-0024-3 9S12XE SECURITY
AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13
AUTH-0027-1 HC(S)908 update Authorized 2016/3/13
AUTH-0027-2 HC(S)908 security Authorized 2016/3/13
AUTH-0028-1 Renesas V850 Authorized 2017/10/9
AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
XPROG-M V5.84 Adapters:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adaptor for 5M48H P-Flash
Please windows system required as below:
1. Windows system should be Windows XP 32bit OR windows 7 64 bit, all the patch software for the windows system should be installed already and the windows properly works well...
2. The windows system should be with at least 2 partitions (except the CD ROM.)
3. Can not be working with a virtual hard disk.
Install manuals in words:
1. Click the file "installation.reg", get the file information to the regedit.
2. Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwise, the Xprog software will not start.
3. Plug the Xprog main interface to the computer, install the USB driver.
4. Copy the folder "XPROG-BOX5.84" to the desktop, and open it, and run the "xprogdesktop.exe", then software open.
1pc x XPROG-Box Hardware (Aluminum Enclosure).
20pcx Adapters Set
1pc x USB Cable.
1pc x USB Dongle
1pc x CD with XPROG-Box Software (V5.84)
Hot Branded Products:
Shipping method and delivery time:UK Warehouse Shipping: 2-4 working days
, Only item title marked " Ship from UK " will ship from UK warehouse. ( UK local address 2-4 working days arrival, other European countries will take about 5-10 working days arrival depend on the place), We will pay the freight ship to each customer, If customer country does not have Shipping service in our UK warehouse or only have UPS service, customer need pay the UPS freight difference or package will ship from Shenzhen, China.DHL Shipping: 2-4 working days
, To help you clearance we will help declare a lower price on the invoice help clearance. If address is remote area, customer need pay remote freight or we will ship by Normal Post or Yanwen Express.Yanwen Express: 5-10 working days
, usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
If you have any questions about the device, the price or the payment, please feel free to contact us.Contact Person:
13983755934Official Email: Sales@obd2shop.co.ukSkype: OBD2Tool.co.ukLive-Chat: Online service support
Xprog 5.70 5.74 5.84 read ELV MC68HC908GR16 FLASH+security for Audi
How to use Xprog M V5.84 to read EEPROM - obd2shop.co.uk
V5.84 X-PROG Software install video - obd2shop.co.uk