Launch CReader 3001 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
New arrival LAUNCH Creader 3001 full OBDII/EOBD code reader scanner diagnostic tool
Launch CR3001 Introduction:
CReader 3001 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
Engine Check Including:
1. Read code
2. Remove code
3. Live data
4. Freeze frame
5. I/M readiness
6. Freeze frame
7. O2 sensor test
8. On-Board Monitor
9. EVAP system
10. Vehicle Information reading
Launch Creader 3001 Features:
1. Support vehicles 1996 & newer (OBDII &CAN)
2. Support Protocol IOS9141-2, IOS14230-4, SAEJ1850, IOS15765-4
3. Coverage for the latest models 1 through 10
4. Read & Clear DTCs
5. Read Live Data
6. Identify VIN information
7. Views freeze frame data
8. Turns off Malfunction Indicator Light(MIL)
9. Display monitor test (mode 6)
10. Read pending fault code
11. DTC code lookup
CReader 3001 Support Car list:
Support Car Models for OBDII diagnostic function:
Note: CR3001 only Support 12V Gasoline& Diesel, Does not support 24V Truck
Need Standard OBD2 Protocols from 2000 to now
for Chrysler, for Ford, for GM, For Jeep ...
Need Standard OBD2 Protocols from 2003 to now
For Alfa Romeo, for SAAB, for Acura, for Opel, for Audi for Seat, for Peugeot, for Renault
For Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Citroen, for Volvo, for Fiat, for VW, for Ford, for Jaguar...
Need Standard OBD2 Protocols from 2006 to now
for KIA, for Isuzu, for Honda, for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota...
Need Standard OBD2 Protocols from 2009 to now
NOTE: Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol
Support OBD2 protocols car: (must be OBD2 protocols car)
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2 (5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
CReader 3001 Supported Language:
English, French, Russian, Spanish, German, Italian, Portuguese
How to change language CR3001 Language:
Easy to Carry
The OBD2 scanner's mini size fits comfortably in the palm of your hand. so that you can carry it around no matter in garage or on a trip.
Launch 3001 Specifications:
||1.77 " TFT, 160*128dpi
||0℃ - 50 ℃ (32 ℉ - 122 ℉)
||-20 ℃ - 70 ℃ (-4 ℉ - 158 ℉)
||118mm*68mm*22.3mm (4.65" *2.68 " *0.88 ")
1pc x Launch Creader 3001 Diagnostic Tool
Hot Branded Products:
Shipping method and delivery time:
UK Shipping: No Tax No Vat, 2-4 working days arrive. For products marked " UK Ship " and UK local customer
EU shipping: No Tax No Vat, 5-7 working days arrive. For products marked " EU Ship " and from EU countries, if not belong to EU, need to clearance
Yodel/Royal Post/herems: No tax, around 5-7 days arrive . For products UK out of stock, and customers from UK
Yanwen: No Tax No Vat, 7-14 working days arrive, ship to all over the world, mainly for UK/EU warehouse no stock
DHL: Has Tax, need to clearance, 3-5 working days arrive. Used for UK/EU no stock, customers request ship this way. Need to clearance, we will declare a low price on the invoice help to clearance.
If you have any questions about the device, the price, or the payment, please feel free to contact us.
Contact Person: Elyza
Whatsapp: +86 13983755934
Telephone: +86 13983755934
Wechat: +86 13983755934
Official Email: Sales@obd2shop.co.uk
If you are a car DIY or an average car owner, did you come across any of the following situation?
-Have check engine light on and want to know what it’s meaning and reset it.
-Have realized a drastic drop in fuel mileage then you need to check the O2 sensor.
-When you suspect that there is a leak in the fuel system then it’s advisable to perform EVAP test.
Then you need one basic diagnostic scanner. Fortunately, Launch CReader 3001 is such an affordable scanner that can help you to perform basic diagnostic functions.
Launch CReader 3001 spotlights:
1. With in-built DiagnosticTrouble Code (DTC) lookup library
It means that Launch CReader 3001 scan tool retrieves codes and display what are their meaning on the screen. Which help user quickly and easily judge where is the problem and how to do next.
2. Wins in O2 sensor test
If you realize a drastic drop in fuel mileage then you need to check the O2 sensor.
Launch CReader 3001 will help you to effectively determine if the O2 sensor is properly functioning.
A properly functioning O2 sensor analyzes the amount of oxygen available in a car’s exhaust stream.
The information is turned into an effective voltage signal used to control the fuel ratio as well as emission.
A defective sensor transmits erroneous voltage signals to vehicles onboard computer.
As a result, the vehicle will consume more fuel and emits fumes that pollute the air.
Other signs that may point to a bad oxygen sensor include rough idling, engine stalling, and weak acceleration.
Besides, you can detect a strong smell and Malfunction Lights being subsequently turned on.
Launch CReader 3001 will tell when there is a problem with the O2 sensor.
Then you can replace the O2 sensor if it is defective.
Replacing a defective O2 sensor can prevent possible damage to the catalytic converter. Catalytic converter cost thousands of dollars to replace.
3. Wins in EVAP test
Launch CReader 3001 can retrieve EVAP codes. The EVAP system helps to check fuel vapor leaks including when there is a missing gas cap or a loose gas cap.
The EVAP monitor points out vapor leaks when pressure or vacuum is applied to vapor lines, fuel tank, and charcoal canister.
A diagnostic trouble code is generated when EVAP detects a leak that exceeds 0.040 or 0.020 for vehicles manufactured after 2000.
Equally, if the monitor detects an absolute lack of airflow during the time the purge valve is opened it will generate a diagnostic code.
Launch CReader 3001 will help you to retrieve the diagnostic codes ranging from P0440 to P0457.
Even better, the inbuilt DTC lookup library will define the codes simplifying analysis and repair process.
4. Reset check engine light on
Launch CReader 3001 OBD II scan tool can read the check engine lights and defines the code.
Launch CReader 3001 is a plug and play scanner all you need is to directly connect it to your car.
It has a link connector that connects to a 16 pins port located near the steering wheel.
Once you have established a connection you can use the up or down buttons to select codes.
You can also use the return button when you want to go back to a previous code.
Once you have identified the code that you want to clear all you need to do is to press the “OK” button.
Can my car use Launch CReader 3001?
If you have an OBDII compliant car then chances are that Launch CReader 3001 can help you diagnose it.
Besides, this scan tool is compatible with all OBDII/EOBD and CAN protocols.
Can it be reset for other languages except for English?
Yes, it is available with English, Portuguese, Russian, Italian, Spanish, French, and German.
Who it can serve?
Launch CReader 3001 is primarily designed for DIY and average car owners who want to perform basic diagnosis on their cars.