SVCI DoiP Diagnostic Tool for Jaguar and Landrover is compatible with Pathfinder and SDD2 software and supports all JLR maintenance models produced after 2010.
SVCI DoiP VCI for Jaguar and Land Rover
SVCI DoiP VCI Description:
The SVCI DoIP Vehicle Communication Interface (VCI) is used by professional technicians as an aid in diagnosing and repairing vehicle electrical and electronic systems. The SVCI DoIP is designed to connect the vehicle to a host PC computer application which achieves functions through the SVCI DoIP for data transfer and Electronic Control Unit (ECU) reprogramming. Using the VCI Manager PC application software, The SVCI DoIP is capable of communicating over a USB cable.
The SVCI DoIP is a standards-based tool – supporting the SAE J2534 interface, and the ISO22900-2 Diagnostic-Protocol Data Unit (D-PDU) API. Fully support JLR diagnostic software SDD2 and Pathfinder, including diagnostic, ECU update, CCF configuration and all the functions of JLR.
1. Appearance and details
SVCI DoIP hardware has two LED lights. Different LED represents a different status. The LED light on the left flashing green indicates that the equipment is working normally, The LED light flashing red light indicates that the firmware is being upgraded. The LED on the right always lights up to indicate that DoIP protocol is activated, The LED on the right is flashing, indicating that it is communicating with the DoIP protocol. As shown in the figure below.
2. SVCI DoIP kit contents
The SVCI DoIP base kit includes a USB cable, user manual, an OBD interface extension cord and hardware needed to communicate with ECU of JLR vehicles.
3. Technical Specifications
Protocol Type
Protocol name
Physical Layer
l CANBUS Channel 1 at 125/250/500/1000kbps
l CANBUS Channel 2 at 125/250/500/1000kbps
l One UART channels (K & L Lines)
l One J1850
Communication Layer
l ISO9141
l ISO14230
l J1850 PWM(Ford SCP)
l ISO14229 JLR Powertrain CANBUS
l ISO14229 JLR Body CANBUS
l ISO14229 JLR Chassis CANBUS
l ISO14229 JLR Comfort CANBUS
l ISO13400 DoIP
Others
l Pin voltage Measurement
l Programming Voltage Generator
l Internal Temperature Sensor
l Power through DLC or USB Type B Connector
4. Supported vehicles list
Software Name
Vehicle Name
Model
Years
Support’s functions
SDD2
Land Rover
L316
2005~2016
All
L319
2005~2016
All
L320
2005~2016
All
L322
2005~2016
All
L359
2005~2016
All
L405
2005~2016
All
L494
2005~2016
All
L550
2005~2016
All
L538
2005~2016
All
Jaguar
X100
2005~2016
All
X150
2005~2016
All
X152
2005~2016
All
X202
2005~2016
All
X250
2005~2016
All
X350
2005~2016
All
X351
2005~2016
All
X400
2005~2016
All
Pathfinder
Land Rover
L405
2017~latest
All
L494
2017~latest
All
L462
2017~latest
All
Jaguar
X152
2017~latest
All
X761
2017~latest
All
X760
2017~latest
All
X260
2017~latest
All
Note: All JLR models produced after 2016 are applicable for Pathfinder software, SVCI DoIP device will constantly update and support the latest JLR models.
How to use SVCI DoIP?
If you want to use the SVCI DoIP device normally, you have to download and install three software, they are Pathfinder, SDD2 and SDD2 "QuickLoader" software. This three software can be installed in the same operating system together, and when you use SDD2 software, you have to open it from the SDD2 "QuickLoader" software. And when the software is installed, the device needs to be connected to the laptop and vehicle. The Pathfinder software is primarily intended for Jaguar Landrover models manufactured in 2017 and beyond, The SDD2 software is mainly aimed at Jaguar Landrover 2016 years models and before.
1. Download and install software 1.1 Installation steps of the PATHFINDER software:
Step 1: Before installing the software, you need to make sure the C drive has a capacity of more than 250GB.
Step 2: Access to software download center http://www.flyobd.com/shop/download-center/
Step 3: Select the “Pathfinder” item and download pathfinder installer
Step 4: Double-click the file that you download and save, and then install it.
Step 5: The pathfinder installer will automatically prompt you to download and update the software and files you need to install pathfinder(The automatic download and installation will takes up to 24 hours according to network download speed). 1.2 Installation steps of the SDD2 and SDD2 "QuickLoader" software:
Step 1: Download software from http://diagnosticdelivery.jlrext.com/idscentral/
Step 2: Select the “SDD_xxx_Full.exe” file, download and save it.
Step 3: Double-click the “SDD_xxx_Full.exe” file and install it.
Step 4: Select SDD2-"QuickLoader" item from http://www.flyobd.com/shop/download-center
download and install it.
Step 5: Double-click the “SDD2 "QuickLoader.exe” file and install it.
2. Device Connection
After installing the software, you need to connect the equipment to the computer using a USB cable. Then connect the OBD interface of the vehicle through SVCI DoIP device, or connect the OBD interface of the vehicle and the equipment through the OBD extension cord. The equipment connection diagram is shown as below.
SVCI DoIP JLR VCI FAQs:
Q: What is SVCI DoIP? A: SVCI DoIP is a special vehicle inspection tool for Jaguar Landrover models, it is manufactured by BAOCHI.
Q: What does SVCI DoIP do? A: SVCI DoIP hardware is compatible with SDD2 and Pathfinder software, which can achieve all the functions of this two software, it includes diagnostic, program, immobilizer, changes CCF configuration and special function, etc. By the way, SVCI DoIP can achieve all of the original DoIP device function.
Q: Is there a version limit for SVCI DoIP to use SDD2 and Pathfinder software, and can they be used for free? A: SVCI DoIP hardware is compatible with all versions of SDD2 and Pathfinder. The software is free to use, and SDD2 software can be run without registration.
Q: When to use SDD2 software and when to use pathfinder software? A: Use the SDD2 software when you come across a JLR vehicle from 2005-2016, When you come across the Jaguar Landrover models produced after the 2017 model year, you need to use the Pathfinder software.
Q: What are the advantages of SVCI DoIP? A: SVCI DoIP hardware equipment is suitable for all Jaguar Landrover models of the year, and it can achieve all Jaguar Land rover functions. SVCI DoIP hardware itself is small and easy to take. In addition, there are several advantages:
1) High-speed host communication. (3M bps)
2) Stable host communication. (with RTS/CTS flow control)
3) Automatically register the software.
4) Online software update and keep software latest always.
5) Online firmware update.
SVCI DoIP vs JLR VCI DoIP vs DA-Dongle DoIP
SVCI DOIP Package List:
1pc x SVCI DOIP JLR DoiP VCI Hardware
1pc x Software CD
1pc x USB cable
1pc x User manual
1pc x Outer packing
1pc x OBD extension cord
Hot Branded Products:
Shipping method and delivery time:
UK Warehouse Shipping:2-4 working days, Only item title marked " Ship from UK " will ship from UK warehouse. ( UK local address 2-4 working days arrival, other European countries will take about 5-10 working days arrival depend on the place), We will pay the freight ship to each customer, If customer country does not have Shipping service in our UK warehouse or only have UPS service, customer need pay the UPS freight difference or package will ship from Shenzhen, China. DHL Shipping:2-4 working days, To help you clearance we will help declare a lower price on the invoice help clearance. If address is remote area, customer need pay remote freight or we will ship by Normal Post or Yanwen Express. Yanwen Express:5-10 working days, usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers. If you have any questions about the device, the price or the payment, please feel free to contact us. Contact Person: Elyza Whatsapp: +8613983755934 Telephone: +8613983755934 Wechat: +8613983755934 Official Email:Sales@obd2shop.co.uk Skype: OBD2Tool.co.uk Live-Chat:Online service support
Video
How to install v157 SVCI DoIP SDD software on Win7 - obd2shop.co.uk
