SVCI 2020 Commander Full Version Immo Diagnostic Programming Tool with 22 Software All VAG Benz Special Functions Activated

Product Description

Original SVCI 2020 Commander Full Version Auto Diagnostic Tool

• Unlock Version, No Need Activation. NXP Smart Chip, Fast Speed.
• Adds Suzuki, JLR and Daihatsu Software. Jaguar Landrove/ SUZUKI /DAF Special Funcdtions Work! 
• All VAG, BENZ Special Functions Newly Activated!
• upport Vehicles to Year 2019. Adds 19 Software Compared to SVCI 2018.
• Operating System: Win7 and Win10.

Difference between FVDI 2019 and FVDI 2018

The hardware difference is that FVDI 2019 without battery,but FVDI 2018 with battery. So the SVCI 2019 does not require activation, it will not lock the machine, and the serial number will not be lost. The software difference is that SVCI 2019 has update 3 car softwares than SVCI 2018: 
(1) Commander for VAG V37.0,
(2) Commander for BMW V10.5, 
(3) Commander for Mercedes V10.4. These three softwares are all the latest software, and support basic functions such as fault diagnosis, fault code clearing, and data stream reading of the new 2019 For VAG (For VW For Audi For Skoda For Seat), For Mercedes-Benz, and For BMW cars. Currently, special functions are not supported,but it will make update in 2020 year.


Difference between FVDI 2020 and FVDI 2018
 
FVDI2020 add 3 more car softwares than FVDI2018,and the hardware difference is that FVDI2020 without battery, the FVDI2018 with battery. So FVDI2020 does not need to be activated, it will not lock the machine, and the serial number will not be lost.The software difference is the FVDI2020 has update all 21 car softwares to 2019 years,it means can support cars to 2019.

1. Commander for VAG V37.0，
2. Commander for BMW V10.5，
3. Commander for Mercedes V10.4
4. Commander for Bikes V2.0
5. Commander for Chrysler V3.4
6. Commander for Daihatsu V1.4
7. Commander for FIAT V7.6
8. Commander for Ford V7.7
9.Commander for Hyundai V4.4
10. Commander for JLR V2.6
11. Commander for Mitsubishi V3.7
12. Commander for Nissan V5.7
13. Commander for OPEL V7.5
14.Commander for Porsche V7.1
15. Commander for PSA V6.3
16. Commander for Renault V7.4
17. Commander for Suzuki V1.2
18. Commander for Toyota V11.4
19. Commander for Volvo V6.2

These 19 softwares are all the latest, which support basic functions such as fault diagnosis, clearing of fault codes, reading of data streams, and motion testing to new models of 2019.

Jaguar Landrove/ SUZUKI /DAF special funcdtions are ok.


Latest Update Notice in Oct, 2020:

SVCI V2020 VW Audi Special Function Avaiable--Support MQB platform and Component Protect.

New in V7.4:
- Automatical recognition of swapped files in dump tool. In the most cases the no need to flip bytes manually
- Added support for unsupported till now subtype of Simos7.1 engine control units - Login (PIN) and component security are now available

New in V7.7:
- Added support for VDO instruments cluster 2006+ - odometer changing, reading PIN codes, read/write immobilizer data. Initially only first VDO versions are supported.
- Key-learning - adding key for 15 seconds (old keys continue to work) for VDO CAN instruments

New in V7.9:
- When reading ME7 the MAC is also displayed. Possible to change MAC for ME7 in dumptool too.
- Preapre dealer keys for Q7/A6/Allroad directly from the EZS-Kessy dump
- Learn keys for Q7/A6/Allroad directly in the EZS-Kessy dump

New in V17.0
1. Component protection generation 1:
- Audi A8 2003-2010 (Instrument cluster, seat memory driver, seat memory passenger),
- Audi A6 2004-2008 (MMI, ILM Beifahrer, Central electric, MP3 CD-Changer)
For the A8 seat memory (driver and passenger) also the vehicle identification number is synchronized authomatically.
2. EZS-Kessy adaptation for Audi A8 (2003-2008) and VW Touareg (2007-2008)
3. VDO instrument SW version VK354608LL - V09.00.00 added - no need of working key!
4. VDO instrument SW version V354608ML - V08.00.00 added - no need of working key!
5. VDO instrument SW version VK354607LL - V09.00.00 added - no need of working key!
6. VDO instrument SW version VK354608LL - V08.00.00 added - no need of working key!
7. Johnson Controls Instrument Cluster - mileage recalibration , EEPROM Read/Write.
8. Common user interfaces for all CAN instrument clusters. Now the instrument cluster type is autodected
and all CAN dashboards are read/write in one common place (mileage, immobilizer data, keys)
9. VW Touareg and Audi A6/A7/A8 2010+ added to AN038 and AN039 if there is a working key (or a dealer key)
10. Johnson Controls Instrument Cluster - key-learning completely by OBDII, no need of working key.

New in V23.0
1. Component protection generation 1 for Audi A8 DSP Bose 2003-2010
2. Component protection generation 2 for Siemens Airbags (UDS) (need to modify EEPROM dump)
3. Component protection generation 2 - improved functionalitiy and added SW versions for Climate Control for A6/Q7/Allroad (C6) 2005-2010
4. A6/Q7/Allroad (C6) 2005-2010 simplified transmission adaptation procedure with just one click.
5. EDC17 Boot-Mode - added possibility to change the PIN/CS/MAC/ImmoNumber/Vin directly in the dump
6. Replace of defective BCM2 improvement. Now all BCM2 are covered and no more problem with component protection int MMI2G and MP3 CD-Changer after exchange.
7. TC1767 and TC1797 write flash by boot-mode added
8. Added new versions of VDO NEC dashboards ?both mileage and keylearning
9. Component protection generation 1 for Audi A8 Bosch Airbag 2003-2010
10. DPF OFF for EDC16/EDC17

New in V38.1
- Added modules for diagnostic for the latest MLB platform (A6/A7/A8 2017+, Q7 2015+)

For the full list, please check in Tech Support.

SVCI 2020 Software Installation:

1. There is only one executable file on the CD-ROM.
2. Double-click "CommanderSetup.exe" to start the installation.
3. Do not plug the USB into the computer during the installation.
4. After the installation is complete, connect the USB to the computer.


How to use SVCI 2020 Quick Start Software:
 
1. SVCI 2020 Quick Launch Software has 42 shortcut icons. Left-click the icon to launch the corresponding software.
2. Compared to the quick launch of SVCI 2018, the activation dialog is not displayed after clicking the icon.
3. The last icon is the firmware upgrade program. Click it to start the firmware upgrade program.
4. You must be online to download the latest firmware program. After downloading, click Update to update the firmware program.
5. After clicking the icon, the dongle program icon will appear in the tray at the bottom right corner of the computer.
6. The dongle program cannot be exited while the software is running.


SVCI 2020 Software display:



Note: All VAG , Benz, SUZUKI /Daihatsu have special functions.
Other car brands only support basic functions such as fault diagnosis, clearing of fault codes, reading of data streams, etc.

When you open the commender BMW v10.4、v10.5 software with SVCI2020/SVCI2019 device, the following error will be reported when reading the DTC functions.

when you want to program the radio eg function with BMW software, it will appear the error information like below figures.



Solution way :
step 1: Open the SVCI2020 installation directory
step 2:  Enter "C: Program Files (x86)\A-b-r-i-t-e-s Commander Software List\Common2\ " directory and copy BMW folder to  "C: Program Files (x86)\A-b-r-i-t-e-s Commander Software List\Common\" directory.


FVDI V2020 Package includes:
 
1pc x SVCI V2020 Vehicle Diagnostic Interface
1pc x OBD-16 Cable 
1pc x USB 2.0 Cable 
1pc x TAG Key Tool 
1pc x Mercedes-Benz special 
1pc x vag edc17 and med17 ecu plug adapter 
1pc x BMW cas plug adapter (Only for bmw) 
1pc x Honda 3 PIN adapter  
1pc x KIA 20 adapter 
1pc x HY/KIA adapter 
1pc x One Box

If you have any questions about the device, the price, or the payment, please feel free to contact us.
Contact Person: Elyza
Whatsapp: +86 13983755934
Telephone: +86 13983755934
Wechat: +86 13983755934
Official Email: Sales@obd2shop.co.uk
Skype: OBD2Tool.co.uk