YH For BMW FEM/BDC out of stock , Customer can buy SK247 ( Mini ACDP Programmer ) + SK247-2 Moudle 2 , totally replacement it
YH BMW FEM/BDC Key programmer
YH For BMW FEM/BDC out of stock , Customer can buy SK247
( Mini ACDP Programmer ) + SK247-2
Module 2, totally replacement it
Top 4 Reasons To Get Yanhua BMW FEM Key Programmer:
1. latest version V1.4, Online update
2. Support offline operate, safe and stable, easy to operate
3. Support latest BMW FEM Car Key Programming till 2017
4. No need tokens
Yanhua BMW FEM BDC test platform Features:
Yanhua BMW FEM Key Programmer Tested Version:
1. Can detect FEM/BDC control module in good condition or not.No need to test them on the car, very convenient and efficient.
2. To match FEM/BDC key and reset KM, this test platform has to work together with Yanhua BMW FEM key programmer
2. Comes with START button and switch status indicator, so doesn't need extra START/STOP switch and dashboard, and the dashboard connector is reserved.
Yanhua BMW FEM Key Programmer BMW Vehicles List:
1 Series F20/F21 2011-2017
2 Series F22/F23/F45/F46 2014-2017
3 Series/GT F34/F35 2012-2017
4 Series F30/F31/F32/F33/F36 2014-2017
X5 F15 2014-2017
X6 F16 2015-2017
Support BMW BDC System:
BMW FEM Key Programmer User Instruction:
1pc x Yanhua BMW FEM Key Programmer
Hot Branded Products:
Shipping method and delivery time:UK Warehouse Shipping: 2-4 working days
, Only item title marked " Ship from UK " will ship from UK warehouse. ( UK local address 2-4 working days arrival, other European countries will take about 5-10 working days arrival depend on the place), We will pay the freight ship to each customer, If customer country does not have Shipping service in our UK warehouse or only have UPS service, customer need pay the UPS freight difference or package will ship from Shenzhen, China.DHL Shipping: 2-4 working days
, To help you clearance we will help declare a lower price on the invoice help clearance. If address is remote area, customer need pay remote freight or we will ship by Normal Post or Yanwen Express.Yanwen Express: 5-10 working days
, usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
If you have any questions about the device, the price or the payment, please feel free to contact us.Contact Person:
13983755934Official Email: Sales@obd2shop.co.ukSkype: OBD2Tool.co.ukLive-Chat: Online service support
Guide Use YH BMW FEM BDC Key Programmer - obd2shop.co.uk
BMW FEM/BDC add keys procedures
Car model and year: 2014 BMW 1 series
Tools to use:
Disassembly toolof BMW FEM computer, charger, soldering iron
Open the bin file
Plug the BMW-FEM adapter into the OBD port of the 2014 BMW 1 series.
Open the BMW electronic door, and ensure the BMW voltage is not lower than 13.0V
Use the USB cable in the package to connect the BMW-FEM adapter and the computer.
Open VVDI2 BMW V4.3.0 software, after serial no click the “Connect” to Break off”
Disconnect the battery power first, remove the FEM/BDC, and use the programmer to read and save the original data of 95128/95256 EEPROM. Complete the above work firstly, then click “OK”.
Step 1: Backup(Read) coding data
Save the coding data that read out, because the step 4 will use this data.
Step 2: update / program ECU
1) Disconnect the battery power first
2) disassemble the FEM computer
3) Before disassemble FEM, take photo so that you can remember exactly the position of every fuse.
4) Disassemble the 95 series chips, read out the data and save.
5) solder the eeprom IC in the FEM computer board.
When disassemble and soldering the chip, please protect the small resistor close to the chip.
6) Solder the IC chip that is disassembled from the FEM board onto the BMW-FEM programmer to read out the data.
7) use the computer to open digimaster 3 software (D3 is optional)
Click on “Special programmer”, choose the corresponding model IC to read out the data.
Save the data in the form of BIN.
Read the BMW-FEM/BDC instruction saying “Please write the newly generated EEPROM data in 95128/95256 with the programmer. Solder it back to FEM/BDC and install it back to the vehicle. Restore the power supply of the vehicle. Complete the above work firstly, then click “OK”.
Writing the data
Write into the data successfully
when the new data restore into the IC, solder the IC back to the FEM computer board.
Put the FEM computer board into the shell and reinstall it back to the computer.
Write the 95128/85256 into the new EEPROM data using BMW-FEM adapter, then solder it back to the FEM computer board. Then reinstall the FEM computer into the computer, supply power to the vehicle. Then click on “OK”.
Will upgraded ECU, please ensure the vehicle battery voltage is not lower than 13.0V during the upgrade, the process will take 10-30mins, please wait patiently.
Use the BMW-FEM adapter to restore the original 95128/95256 EEPROM data that is read out for the first time. Install the FEM/BDC, supply the power to the vehicle. Complete the above work firstly, then click “OK” to confirm.
Click “Restore data” then open 95128.Bin to write into the data.
Step 3: Add key.
Please put the working key close the coil (Located on the lower right of the steering wheel)
read ISN code.
Take note the working key ID
Again get prompt “Please put the working key close the coil (Located on the lower right of the steering wheel)”.
Tick on the key NO. (Free) and click “Learn new key”
BMW FEM/BDC Learn new key successfully.
Step 4: Recover (write) coding data.
add BMW FEM/BDC key successfully
Special function: Delete (Disable) key
If the car owners have the requirement to delete the useless or the lost key, please do the below operation.
Note: please do not delete the working key by mistake.
Click on “Delete (disable) key”
Prompt: Please put the working key close the coil (Located on the lower right of the steering wheel)