Xhorse Smart Key Box Installation Guide

Matched product:

Xhorse XDSKE0EN Smart Key Box to generate remote control use with MINI Key Tool/Key Tool Max/Key tool Plus/VVDI2

Latest price:£67€77^.11US$81^.74

£60€69^.05US$73^.2010% off

• Item No. HKSK366
• Free Shipping

Developed and produced for the aftermarket. It adpots advanced RF technology and is suitable for the car with push start function.
Support add smart key for car
Support add or modify the keyless-enter function
With simple installation and reliable performance.

How to install Xhorse Smart Key Box?
Installation steps:
A power line, HF antenna, LF antenna(long+short) are required.

1. Soldering the circuit board.

• Soldering the key diagonally;
• Soldering the cable regardless of polarity;
• Soldering the original key into Smart Key Box.

2. Key learning.

• Long press the learning key, wait until indicator lights up to enter the learning mode;
• Learn the smartphone firstly, then press any key to learn the remote control;
• Long press the learning key, the indicator goes out to quit the learning mode.

3. Install Xhorse Smart Key Box;

• Insert the LF antenna(long) into Port 1;
• Insert the LF antenna(short) into Port 2;
• Insert the HF antenna into the HF port;
• Connect one end of the power supply cable to Smart Key Box.

(Yellow wire: connect to the ACC key power, cannot be omitted.)
(Vbat or earth wire: connect to OBD or Vbat from the fuse box.)

4. Test.

• Test Keyless enter function;
• Test smart lock car function, Panic and Open Trunk button are workable.

Done!


Scan the QR code to download Smart Key Box app on smartphone.
It can be searched in Google Play Store & App Store as well.