This is the only way for the correction of w169 new models.
W169 Can Filter (for 2006 model of A-class)
SMPS MPPS v12 Tuning Remap Chiptuning CAN Flasher is a USB chip tuning interface. This is good clone working with v12 version of software.This interface lets you to read and write memory of a car computer through the diagnostic connector.
EDC16 ECU Flasher V 3.1.1236
ECU flash reading/writing over diagnostic socket for a wide range of ECU units.
It could identify 17 digit code for all new type of the car which were included E65 chassis, kilometer data at that time and all the info of the car's service. It could issue the service list soon since it has KSD man-hour system & ETK parts software.
SKS-3058, diagnostic tool of testing analyzing equipment of automobiles EECS and ECU, is specially designed for engineers who repair automobiles EECS and ECU.
BDM100 ECU chip tuning tool is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).
VAG ECU TOOL for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7. Read and write access to the EEprom. Reading the secret odometer (if stored in the engine control unit). Immo-off function, login display, VIN change - everything about the diagnosis socket - not removing the ECU. With the write function is motor control "cloning" - no need to teach. Indispensable for workshops, recovery or Chiptuning.
The LabTool-48UXP can let you select the verify voltage after you have programmed the device. The Vcc voltage can be 2.0V to 6.5V. This feature ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention.
This is the only way for the correction of w170 new models.
W170 Can Filter (for 2006 model of SLK-class)
This device is intended for computers on the cars flashing by OBDII connector or directly connecting to the ECU the car.
Mercedes Benz W221 Can Filter (for 2006 model of S-class)
TMS374 Auto ECU EEPROM programming tool supports EEPROM programming of TMS374 MCU.
NEC EEPROM Programmer is COM connector and support USB connector as well.Its mileage correction reset your mileage by directly input the data.It works on CPUs use NEC board, supports userself upgration.
Original Wellon VP380 VP-380 Programmer
The WELLON Programmers are affordable, reliable, and fast universal device programmers. They are designed to operate with the Intel Pentium-based IBM-compatible desktop computers and laptops. No interface card is necessary to plug the module into a PC (this feature is especially handy for laptop users). The menu-driven software interface makes them easy to operate
V5.017 KESS V2 With token reset button Plus V7.020 KTAG K-TAG ECU Programming Tool Master Version with Unlimited Token
Top 3 reasons to get KTAG V7.020:
1. With latest Firmware version: V7.020
Software version: V2.23
2. Add ECU Type: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU,Toyota 76F, and so on, at least 100 more ECU types added.
3. Unlimited Token
The memory for SPI 28 software and data is implemented as a programmable component into ECUs for a long time now. Ever since these components are erasable even as an assembled part of the ECU more and more vehicle manufacturers chose to provide the possibility to re-load / replace the software and data contents of the respective control unit in addition to the analysis and error detection mechanisms.
UPA USB Serial Programmer was used to do motorola chip programming.It's similar with XPROG-M programmer.
Mercedes Benz W164 Can Filter (for 2006 model of ML164、SLK171、E211、R230)
KESS V2 V2.15 OBD2 Tuning Kit is the llatest addition to the Alientech, which is probably the most advanced tool available today.