Product Description
Full package, Hardware + Full Master Software
With the Flex Full Master software package, you gain access to all protocols for over 25,000 vehicles supported by Flex, along with the ability to program in all three connection modes.
Flex Chiptuning Tool Hardware + Full Flex Master Software
This is Flex Chiptuning Tool ECUs & TCUs Programmer Hardware + Full Flex Master Software package
Magic Lock is available for everyone
About Datalogger, is available only for Full Master/Slave
It is also essential to inform the customer of the benefits he will receive from
the purchase of a Magicmotorsport Flex tool:
- Online Tech Support from 8:00 am to 22:00 pm CET
- Lifetime Limited Warranty
- SW Updates every 2 weeks
- Support language
English, Italian,Polish, Deutsch, Russian, Korean, portugues, Spanish, Dutch, French, Greece, Romania, Turkish, Serbian, Chinese
About subscription fee
After 1 year
- Master version Subscription 949 USD/year
- Slave vrsion subscription 593 USD/year
Flex FLK02 FLEX Full HW Kit
Flex is the tool that allows you to remap, update and repair ECUs and TCUs. Using only a PC and a stable internet connection you're be able to link cars, bikes and trucks ECUs.
With Flex you have everything you need to start working in the world of chiptuning and boost your business with a lot of services and solutions in your mechatronics workshop.
The programmer supports all available connection modes. You can easily connect to most of the car ECUs via the vehicle's OBD port. While, for more advanced jobs, BDM, Bootloader and JTAG modes are also possible.
Full package of software functions for FLEX in Master version
The Full Flex Software Package Master includes:
- Software Flex ECU OBD + Bench
- Software Flex TCU OBD + Bench
- Software Flex BDM MPC5xx
- Software Flex Bench BOSCH MEDC17 + Bootloader Tricore
- Software Flex BL Nexus MPC5xxx
- Software Flex Renesas SH705x
- Software Flex BL Infineon C165/166/167
- Software Flex BL ST10
- Software JTAG NEC 76F00xx
Full package of software functions for Flex in Master version, that includes: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Infineon C165/166/167, BL ST10, JTAG NEC 76F00xx.
FLEX Advantages
Operation Mode
OBD, bench and boot
Everything in A Few Clicks
Flex is the perfect solution to read and write engine control units and automatic transmission control units.
25,000 Compatible Vehicles
Program cars, motorcycles, and trucks in OBD, Bench, and Boot modes. Intuitive software and constant updates.
Lifetime Warranty
Get a limited lifetime warranty on the product including the repair or replacement service.
Dedicated Support
Our tech support is available from Monday to Friday until 10.00 pm, and on Saturday until 1.00 pm.
Endless Evolution
With Flex, you have everything you need to start working in the chiptuning world and boost your business with many services and solutions in your mechatronic workshop.
Working with Flex is extremely easy: choose the vehicle brand and model or enter the ECU or TCU code, the software will automatically show available connection modes.
With Flex, you have everything under control thanks to the Datalogger function, allowing you to collect up to 60,000 parameters in real-time such as pressure, torque, air, fuel, exhaust gas temperature, speed, rpm, and much more.
Also, with Magic Lock your work is safe: you can deny access to files saved in engine units to those who are not authorized.

Full Flex software package Master
Go to Check Flex Vehicle List
Flex Full Master software package puts at your disposal all the protocols available for the more than 25,000 vehicles supported by Flex, also make you able to program in the three connection modes.
It is the most complete solution to offer more services to your customers and expand into the automotive market.
Flex Full Master also allows you to create your own Slave network which can include up to 99 mechatronics.
Flex Full Master is the more complete software package for your Flex. Get the most out of the programmer for ECUs and TCUs to upgrade your business.
Main features:
- all Magicmotorsport solutions for ECU and TCU.
- the totality of programming modes available.
- the possibility of create your own Slave network.
Recent Update:
- SIM2K-510 New Exclusive Solution
- Supports Bosch MD1 MG1 ECUs boot glitch unlocking No RFT.
- New Bosch MD1CS005 protocols now available via OBD on Ford 1.5L EcoBlue engines.
- Add OBD protocol of Bosch MG1CS036 ECUs for Ford vehicles up to 2025.
- Add OBD and Bench protocol of Delphi ETC3 UDS ECU for DAF trucks.
- Add Cadillac CT6 Bosch E68 ECU in 2019 and 2020.
- Update OBD solution for Continental GPECx, specifically GPEC2, GPEC2A, GPEC3, GPEC4, GPEC4LM engine units.
- Add Bench Solution for ZF 9HP48.
- Add Vitesco GPEC4LM control units in Boot and OBD.
- Add VAG 2.0 TFSI (MG1CS031) OBD.
- Add Boot solution for Marelli 11GF engine units.
- Unlock and program in OBD mode Bosch MD1CS014 engine units with the latest anti tuning protections.
Flex Detail Update Information
New Support for Bosch MG1CS042
and MD1CS012
Version 8.32.0.0 of Flex Out Now
With the latest Flex version, Korhex expands its support for Bosch ECUs, introducing
new Unlock options for Stellantis, Hyundai and Kia vehicles.
Bosch MG1CS042 ECUs used on Stellantis Group vehicles and Bosch MD1CS012 ECUs
installed on Hyundai and Kia vehicles can now also be unlocked using EMFI (Electromagnetic Fault Injection) technology.
This method simplifies connection operations and reduces working time,
without the need to work directly on the ECU PCB.
The new protocols are available with an FLS0.20 license or a Flex Full FLS0.5 configuration.
Jaguar and Land Rover: Bosch MDG1 Now Supported by Korhex
Flex version 8.31.0.0 is available
New unlocking options for the Bosch MD1CP007, MD1CP017, and MG1CS028 ECUs
used in Jaguar and Land Rover vehicles, also supported with Korhex.
This unlocking method is available alongside Voltage Fault Injection (VFI) technology,
allowing you to perform the Unlock procedure without any modifications to the PCB,
simplifying connections and reducing operation time.
Once the Unlock procedure is complete, you can continue directly in Bench mode for reading
and writing operations. The new protocols are available with the FLS0.20 license or the
Flex Full FLS0.5 configuration.
New reading and programming options
for Honda and KTM K-line Motocross
Flex version 8.30.0.0 now available
New reading and programming options are now available for Honda, KTM, Husqvarna
and GASGAS motocross bikes. Flex version 8.30.0.0 introduces support for Keihin K-line M16C ECUs, used in a wide range of models manufactured between 2013 and 2025.
Honda ECUs, usually located under the seat, can be accessed via a Pinout connection,
while ECUs from the BMAG group (KTM, Husqvarna and GASGAS) support
both OBD and Bench connections. With these connection methods, you can read
Flash and EEPROM memory directly and access the data needed for further modifications and programming.
This update further expands Flex compatibility in the motocross sector, giving you
more options for working with Keihin ECUs.
VAG Bosch MG1 TC298 with Korhex
Flex Version 8.29.0.0 Is Now Available
Starting today, Korhex also supports Bosch MG1CS011, MG1CS11,
and MG1CS163 ECUs from the VAG Group, equipped with the TC298 processor.
Already accessible through VFI technology, these ECUs
can now be unlocked using Korhex, without the need to work on the PCB, simplifying connection procedures.
Once the unlock is complete, you can proceed directly
in Bench mode to perform reading and writing operations, without having to reopen the ECU.
New Protocol Organization
With version 8.29.0.0, Flex introduces a new protocol classification based on the technology used:
Boot Glitch: for protocols based on Voltage Fault Injection (VFI) technology.
Korhex: for protocols using Korhex technology.
This distinction makes it easier to identify the correct connection method, with dedicated procedures and manuals for each technology.
Particular attention should also be paid to pins A1 and A4.
License Availability
The new protocols are available with the FLS0.20 license or the Flex Full FLS0.5 configuration.
SIM2K-510 New Exclusive Solution
New protocol released in Flex version 8.28.0.0 allowing technicians to program Kefico SIM2K-510 units in OBD, following a simple, fast, and more efficient procedure.
Connect, read, modify!
Just connect the OBD cable, download the Virtual Read and start your modifications.
If the Virtual Read is not available, perform a real read in OBD on Bench mode. The unit will unlock automatically.
Moreover, even CAN FD versions are now supported thanks to the new FLX4.4 adapter.
Upgrade your Flex and expand your intervention possibilities on Hyundai and Kia vehicles.
Mercedes Truck CPC5 after 2020
with Korhex
Flex version 8.18.0.0 is now available
New support for the Truck world: Flex + Korhex enables Boot Glitch on Mercedes CPC5 control units after 2020.
With this release, you can work on CPC5 control units installed on the latest Mercedes Truck heavy-duty vehicles, including Actros and Arocs.
The procedure is managed directly by Flex: position Korhex on the indicated point, follow the guided steps,
and access the SPC58 microprocessor.
A new protocol designed to expand your possibilities for intervention in complete autonomy.
To use it, you need either the FLS0.20 license or the Flex Full FLS0.5 configuration.
New support for Bosch MG1CA920
on Rotax engines
Flex version 8.16.0.0 is now available
With the latest Flex update, Korhex extends support to new-generation SPC58N microprocessors.
The Bosch MG1CA920 control unit from the BRP Group, used on Rotax engines, is now supported with a new dedicated procedure.
Thanks to Flex + Korhex, connection is simpler and more direct: there is no longer
any need to remove the resistor on the PCB or manually solder the Boot point.
Fewer steps. More autonomy in the workshop.
Order Korhex and manage the unlocking of supported control units in complete autonomy.
If you are a Flex Full customer, the license is already included in your subscription.
BMW Marelli MBC1 ed MBC2 in Bench
Version 8.14.0.0 Out Now
Bench support for Marelli MBC1 and MBC2 control units now available.
Version 8.14.0.0 of Flex further expands coverage for the world of two wheels with
new programming possibilities for BMW Motorrad and Husqvarna.
This protocol allows you to work directly via pinout and fully read the content of the unit,
making programming operations easier, safer and more complete.
VAG Bosch MG1CS111 TC298 without RFT
Flex version 8.13.0.0 is ready
More operational freedom, fewer steps, no shipping required. With the new Flex update,
support for VAG Group vehicles expands even further.
Thanks to Boot Glitch unlocking, you can program the Bosch MG1CS111 ECU,
equipped with a TriCore TC298 processor, also in Bench mode.
Flex FAQ
Q: if I do not renew the annual subscription after the first year,
will the FLEX continue to work with all currently activated protocols and licenses,
and I will only lose access to future updates and new protocols?
A: Yes, you can work with Flex even though your subscription is expired.
Clearly, without a valid subscription, it won't be possible to use new protocols,
require technical support and the tool will not under warranty
Package including
1pc x FLK35 Cabling kit: FLX35 color coded wiring harness
1pc x FLK42 Adapter kit: 6 pcs set of pin adapters to FLX35
1pc x FLX1.1 FLEX Base Module
1pc x FLX1.9 FlexBox Module for FLEX
1pc x FLX2.10 Connection cable OBD: FLEX to CAN/Kline RED
1pc x FLX2.11 Connection cable OBD: FLEX to ENet GREEN
1pc x FLX3.3 Connection cable: FlexBox port C to NEC 7F00 XX
1pc x FLX3.4 Connection cable: FlexBox port D to BDM MPC5xx
1pc x FLX3.9 Connection cable: USB 2.0 AM-BM BLK 1.8m
1pc x FLX4.1 FlexBox port E 40 pin adapter for FLK35
1pc x FLX9.1 FLEX & FlexBox diagnostic adapter
1pc x FLK49 Switch Mode Power Supply for FLEX with plugs
1pc x FLX8.10 FLEX Branded Box
1pc x FLX2.14 OBD Female Cable
1pc x FLK43 4-adapter set for FLK35 - Flex Supplementary Kit
Full Flex Master Software Package activate online


Hot Branded Products:







Shipping method and delivery time:
UK Shipping (No Tax) : 2-4 working days arrive. For products marked " UK Ship " and UK local customer
EU shipping (No Tax) : 5-7 working days arrive. For products marked " EU Ship " and from EU countries, if not belong to EU, need to clearance
Yodel (No Tax) : 5-7 days arrive . For products UK out of stock, and customers from UK
Yun Express ( No Tax) : 5 - 9 working days to UK, 7-14 days to other European Countries.
Yanwen (No Tax) : 5 - 9 working days to UK, 7-14 days to other European Countries, ship to all over the world, mainly for UK/EU warehouse no stock
DHL: need to clearance, 3-5 working days arrive. Used for UK/EU no stock, customers request ship this way. Need to clearance, we will declare a low price on the invoice help to clearance.
If you have any questions about the device, the price, or the payment, please feel free to contact us.
Contact Person: Elyza
Whatsapp: +86 13983755934
Telephone: +86 13983755934
Wechat: +86 13983755934
Official Email: Sales@obd2shop.co.uk