SUPER MB PRO M6+ Pro Standard Version Wireless Diagnosis Tool with USB Cable + OBD2 16pin Cable

Item No. SP586-C In Stock. History 4 sold.
0 rating
|
Buy Now: £382
GBP 382.00 EUR 440.52 USD 488.96
Whatsapp +86 13983755934
Shipping:
Free Shipping Express Shipping ServiceEstimated delivery time: 3-5 working days.See details »
Weight:
1.0KG
Package:
25.5cm*20.7cm*7.5cm ( Inch: 10.01*8.13*2.95 )
Returns:
Return for refund within 30 days,buyer pays return shipping. Read details »

Product Description

Supports vehicles with DOIP communication protocol.
Compatible with the original Mercedes-Benz software.

SUPER MB PRO M6+ Pro Standard Version Wireless Diagnosis Tool + USB Cable + OBD2 16pin Cable 

 
Based on M6, Super MB PRO M6+ PRO has greatly improved product functions and compatibility, and is 100% compatible with the original Mercedes-Benz software.
This is Standard version M6+ PRO with USB cable and OBD2 16PIN Cable

 
Product Features:
 
1.100% compatible with the original Mercedes-Benz software.
 
2.The front label of the M6+ uses a design with trademark rights and art copyrights to improve product recognition.
 
3.The communication interface between the M6+ and the computer is a USB3.0 interface, which improves the compatibility of the product with computers and tablets. (Compatible with both old and new computers and tablets, no need to choose old-fashioned computers and tablets with network ports.)
 
4.M6+ supports remote C-side operation. The client does not need to install special diagnostic testing software. Just connect the M6+ to a local computer that can access the Internet, and we can remotely provide customers with paid diagnosis and detection services of vehicle failure. Customers can also set up a local remote diagnostic test in the local area network. The above ways greatly improve the product flexibility.
 
5. M6+ supports vehicles with DOIP communication protocol, such as the new Volkswagen, Audi, Skoda, Bentley, Lambo, etc. A dedicated transition button is provided.

6. Support new Model W223 C206 213 167


M6+ Pro, M6+ and M6 product function comparison chart
 
  M6 Product Functions M6+ Product Functions M6+ Pro Functions
XENTRY Car √ √ √
XENTRY Truck √ √ √
DTS √ √ √
VIDEO √ √ √
MB DOIP √ √ √
MB WIFI √ √ √
PC USB × √ √
PC RJ45 √ × √
Vehicle Voltage Real-time Display × × √
Other DOIP × √ √


Super MB Pro M6+ PRO Functions:
 
1. 100% compatible with the original Mercedes-Benz software.
2. The front label of the M6+ uses a design with trademark rights and art copyrights to improve product recognition.
3. The communication interface between the M6+ and the computer is a USB 3.0 interface, which improves the compatibility of the product with computers and tablets. (Compatible with both old and new computers and tablets, no need to choose old-fashioned computers and tablets with network ports.)
4. M6+ supports remote C-side operation. The client does not need to install special diagnostic testing software. Just connect the M6+ to a local computer that can access the Internet, and we can remotely provide customers with paid diagnosis and detection services for vehicle failure. Customers can also set up a local remote diagnostic test in the local area network. The above ways greatly improve product flexibility.
5. M6+ supports vehicles with DOIP communication protocol, such as the new Volkswagen, Audi, Skoda, Bentley, Lambo, etc. A dedicated transition button is provided.
8. Support new Model W223 C206 213 167 (if only the M6+ firmware without software, need to open this license separately)


M6+ Pro Connection Instructions




M6+ PRO Mercedes-Benz configuration
 
1. Plug the M6+PRO into the power supply or connect the OBD to the test vehicle, and plug in the USB/LAN cable of the M6+PRO.
 
2. Turn on the computer and plug in the computer USB/LAN cable.
 
3. Open the computer network configuration interface and find the Realtek USB FE Family Controller network/the network adapter that comes with the PC.


4. Click “Properties”--TCP/IPV4, and set the IP address as shown in the figure below.



5. Click “Advanced”, and add a group of network IP addresses as shown in the figure below.



6. Click “OK”. After the configuration is successful, the display is as follows.



7.For the same computer, if you replace a new M6+PRO, you need to reset the IP address. After the setting is completed, the computer is successfully bound to the M6+PRO and there is no need to set the IP address again for wired and wireless Internet access. (Use LAN port connection mode, no need to re-set IP when changing devices).
 
8.You can test Mercedes-Benz normally. Please connect the diagnostic cable with SUPER MB PRO logo.



9. BMW wireless BMWAiCode configuration(only for F+G chassis)
Connect to the M6+PRO -***, password：123456789, wirelessly, press and hold the M6+PRO switch button for 3 seconds, and the M6+PRO host wireless indicator will flash. The computer-side BMWAiCoder configuration is as follows:



10. BMW wired BMWAiCode configuration(only for F+G chassis)
Connect the USB/LAN cable, press and hold the M6+PRO switch button for 3S, and the M6+PRO host wired indicator light will flash. The computer-side BMWAiCoder configuration is as follows:



 
Package Includes:
 
 
1pc x SUPER MB PRO M6+ Pro Host
1pc x OBD2 16pin Cable 
1pc x USB Cable
 
 





 
Hot Branded Products:

xhorseautellaunch x431cgdi 

xtoolvxdiagyanhualonsdorobdstar
 
Shipping method and delivery time:

UK Shipping (No Tax) : 2-4 working days arrive. For products marked " UK Ship " and UK local customer
EU shipping (No Tax) : 5-7 working days arrive. For products marked " EU Ship " and from EU countries, if not belong to EU, need to clearance
Yodel (No Tax) :  5-7 days arrive . For products UK out of stock, and customers from UK
Yun Express ( No Tax) :  5 - 9 working days to UK,  7-14 days to other European Countries.
Yanwen (No Tax) : 5 - 9 working days to UK,  7-14 days to other European Countries, ship to all over the world, mainly for UK/EU warehouse no stock
DHL: need to clearance, 3-5 working days arrive. Used for UK/EU no stock, customers request ship this way. Need to clearance, we will declare a low price on the invoice help to clearance.
 
If you have any questions about the device, the price, or the payment, please feel free to contact us.

Contact Person: Elyza

Whatsapp: +86 13983755934

Telephone: +86 13983755934

Wechat: +86 13983755934

Official Email: Sales@obd2shop.co.uk



OBD2shop.co.uk
Tags: super mb pro m6 plus
Back to top