[UK/EU Ship] Super MB PRO M6+ DoIP Benz Diagnostic Tool Full Configuration Support new Model

Product Description

SUPER MB PRO M6+ Full Version

Difference among each Super MB PRO M6 +

SP436 Full configuration= MB Star full function + BMW F+G series coding + Other DoIP
SP436-B Basic configuaration = Super mb pro M6+ with USB Cable and OBD2 16pin Cable
SP436-C Truck configuaration = Super mb pro m6+ for trucks with OBD2 16pin Cable + USB Cable + 14pin Cable


Super MB Pro M6+ Introduction:

Based on M6, Super MB PRO M6+ has greatly improved functions and compatibility and is 100% compatible with the original Mercedes-Benz software.


What's New in Super MB Pro M6+?

Supports E-SYS, and Aicoder for BMW F and G series coding.
Compatible with BMW BimmerCode, Bimmerlink, MHD, Bimmergeeks, XHP Flashtool, ODIS-e, XDelete, M Flasher, etc App.
Can be used as a DoIP device for VAG.
 

	Super MB Pro M6	Super MB Pro M6+
XENTRY	√	√
XENTRY Truck	√	√
DTS	√	√
VIDEO	√	√
MB DOIP	√	√
MB WIFI	√	√
PC USB	×	√
PC RJ45	√	×
BWM Aicoder	×	√
BWM E-SYS	×	√
BWM APP	×	√
Other DOIP	×	√

Super MB Pro M6+ Functions:
 
1. 100% compatible with the original Mercedes-Benz software.
2. The front label of the M6+ uses a design with trademark rights and art copyrights to improve product recognition.
3. The communication interface between the M6+ and the computer is a USB 3.0 interface, which improves the compatibility of the product with computers and tablets. (Compatible with both old and new computers and tablets, no need to choose old-fashioned computers and tablets with network ports.)
4. M6+ supports remote C-side operation. The client does not need to install special diagnostic testing software. Just connect the M6+ to a local computer that can access the Internet, and we can remotely provide customers with paid diagnosis and detection services for vehicle failure. Customers can also set up a local remote diagnostic test in the local area network. The above ways greatly improve product flexibility.
5. M6+ supports BMW E-SYS, Aicoder, wired and wireless programming and coding of F and G series, and supports BMW modification, and hidden functions activation.
6. M6+ supports BMW APP software, provides mobile phone English version of Bimmercode (coding hidden functions activation) Bimmerlink (diagnostics codes clearing), and other mobile phone software, and supports MHD. Bimmergeeks .. XHP Flashtool. ODIS-e.XDelete.THOR-the M Flasher.PRO- Tool and other mobile apps.
7. M6+ supports vehicles with DOIP communication protocol, such as the new Volkswagen, Audi, Skoda, Bentley, Lambo, etc. A dedicated transition button is provided.
8. Support new Model W223 C206 213 167


For BMW cars testing support DOIP, the device Super mb pro m6+ need to change to DOIP mode

after change well, communication light will flash slowly.
if not flash slowly, means not switch well.

Note: for BMW only test BMW F  I G chassis car, not support E chassis car.


MB PRO M6+ Connection Instructions:




1. Connection between MB diagnostic software and hardware
 
(1) Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, ② is always on and beeps once, indicating the startup is finished.

(2) Wired connection: Connect the USB port ⑦ of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and the IP address of the network connection property will be changed to 169.254.255.*, Subnet mask: 255.255.0.0, Preferred DNS: 169.254.255.255, click “Advanced”, add multiple IP addresses as 172.29.127.*, 255.255.0.0. After the computer or tablet is connected to the network, ④ the indicator light will be on.


(3) Wireless connection: You cannot find the wireless network by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find an M6+ DOIP-**** network on the computer or tablet, just connect it. ⑤ The green light of the wireless indicator is always on, the wired light is off, no setting is required, and the password is 123456789.

(4) After opening the BEN software lock on the computer side, the original diagnostic test software can be used normally.

(5) For remote C-end operation, please consult us.

2. BWM software and hardware connection
 
(1) Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, it is always on and beeps once, indicating the startup is finished.

(2) Wired connection: Connect the USB port of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free) and change the network connection attribute IP address to 172.29.127.* 255.255.255.0. Click “Advanced” and add a multi-IP address as 169.254.0.* 255.255.255.0. After the computer or tablet is connected to the network, the indicator light ④ will be always on. Press and hold the switch button ⑥ on the side for 3 seconds and then release it. You can see that the ④ green indicator light is always on and then flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.

(3)The wireless network can NOT be found by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find an M6+ DOIP-**** network on the computer or tablet. You can connect without any settings, and the password is 123456789, ⑤The wireless indicator green light is always on, and ④The wired indicator is off. Press and hold the ⑥ switch button on the side for 3 seconds and release it, you can see ⑤the wireless green indicator light is always on and turns to flash, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.

(4) The computer-side BWM software adopts a wired or wireless connection, and the mobile phone BWM APP software adopts a wireless connection.

(5) For remote C-end operation, please consult us.

3. For DOIP function and hardware connection of other diagnostic test software, please refer to BWM software and hardware connection method.


SUPER MB PRO M6+ Package List:

1pc x SUPER MB PRO M6+ Host
1pc x OBD2 16pin Cable 
1pc x USB Cable
1pc x 38PIN Cable
1pc x 14PIN Cable
1pc x 4PIN Cable



   

---

 

---

Hot Branded Products:
 

---

 


 

---

Shipping method and delivery time:

UK Shipping: No Tax, 2-4 working days arrive. For products marked " UK Ship " and UK local customer

EU shipping: No Tax, 5-7 working days arrive. For products marked " EU Ship " and from EU countries, if not belong to EU, need to clearance

Yodel/Royal Post/herems: No tax, around 5-7 days arrive . For products UK out of stock, and customers from UK

Yanwen: No Tax, 7-14 working days arrive, ship to all over the world, mainly for UK/EU warehouse no stock

DHL: Has Tax, need to clearance, 3-5 working days arrive. Used for UK/EU no stock, customers request ship this way. Need to clearance, we will declare a low price on the invoice help to clearance.
 

---

If you have any questions about the device, the price, or the payment, please feel free to contact us.

Contact Person: Elyza

Whatsapp: +86 13983755934

Telephone: +86 13983755934

Wechat: +86 13983755934

Official Email: Sales@obd2shop.co.uk

Skype: OBD2Tool.co.uk