How to connect YANHUA MINI ACDP and Module 19 to clone VW/Audi DQ380/DQ381 0DE Gearbox
Matched product:
- Item No. SK247-19
- Free Shipping
Yanhua ACDP Module 19 supports all ZF 8HP, DQ380/DQ381 0DE, MB VGS-NAG3, BMW GETAG 7DCT, and BMW TEMIC DKG gearbox clone.
How to use
Yanhua Mini ACDP and
Module 19 to clone VW/Audi DQ380/DQ381 0DE gearbox on mobile phone? This article is showing the procedure step by step.
-
Install Modules
Install the SH715XX-ODE interface board & DB15-LAN adapter, then connect together.
-
Save Original Module Info
Open Mini ACDP app, press
- VW >> Gearbox Clone >> Audi >> Detect module info >> Read EGS information >> OK
Check the identified module info, then save the screenshot, press “Exit”.
-
Backup Data
Go back to press
- DQ381(0DE) >> Full backup data >> Continue >> Check the info, continue >> OK >> Save >> OK >> OK >> OK
Backup chip data finished.
-
Write Data
Connect another 0DE gearbox and prepare to write original data.
- Full write data >> Continue >> Check the info, continue >> OK >> select the data to be written >> Check info from loaded data, continue >> Continue >> OK >> OK
Note: please don’t cut the power or pull out the device during the programming!
Writing chip data finished.
-
Check If The Clone Is Successful
- Go back to detect module info >> Read EGS information >> OK
Save the module info screenshot to compare with the original info, check whether the clone is successful.
Done!
Yanhua ACDP Module 19 also supports to clone Mercedes-Benz 9GT(VGS-NAG3) gearbox, BMW 7 speed dual clutch(GETAG 7DCT) /(DKG) gearbox.
More questions welcome to contact us.