This is a quick guide on how to install Launch LTR-01 RF Sensors to the tire.
Installation Steps
Remove the valve cap and nut, deflate the tire. Use the bead loosener to break the tire bead.
Caution: the bead loosener must be facing the valve.
Clamp the tire on the tire changer, and adjust the valve at 1 o’clock to the tire fitting head. Use the tire tool to dismount the tire bead.
Caution: always observe this starting point during the whole dismounting process.
Remove the cap and nut from the valve stem. And then remove the sensor assembly from the wheel rim.
Caution: make sure that the nut and cap are installed on the outside of the rim.
Completed!
Now you can go on to use TPMS tool X-431 TSGUN Pro to program the sensors.