Newsletter
How to Use Xhorse Multi-Prog and VVDI2 for MQB RH850/V850 R7F701407 Key Programming
Matched product:
![[UK/EU Ship] Xhorse Multi-PROG Multi Prog Programmer with XDNPM3GL MQB48 Solder-Free Adapters 13pcs](/upload/pro-sm/24051117154206643486.jpg)
[UK/EU Ship] Xhorse Multi-PROG Multi Prog Programmer with XDNPM3GL MQB48 Solder-Free Adapters 13pcs
US$998.40
- Item No. SK408-PP01
- Free Shipping
This bundle kit is Xhorse Multi-Prog Programmer ECU Programmer Plus Xhorse MQB48 No Disassembly No Soldering 13 Full Set Adapters
Buy package sales, save more money!
UK/EU Ship, fast delivery No Tax !
Buy package sales, save more money!
UK/EU Ship, fast delivery No Tax !
STEP 1
Connect Xhorse tools, 1407 dashboard and PC
Run Multi- Prog software
Select Device>> 1407>> MQB48-LOCK (R7F701407)-> READ (VW-> MQB) >> Detail
Check the connection diagram
Use a tweezer and heat gun to remove the 8 capacitors according to the diagram
Scrape the PCB mask before soldering the GND wire to the soldering point
Solder the wires of Xhorse MQB RH850/V850 Cable to the corresponding position on 1407 dashboard PCB
Secure the wires with acetate tape
Connect MQB RH850/V850 Adapter to Multi-Prog Programmer
Connect Multi-Prog and VVDI2 Programmer to the PC by USB cables separately
Don’t forget to connect the 12V power supply to Multi Prog as well
STEP 2
Read chip data by Xhorse Multi Prog
After connection, select “Crack Reading” to decode the chip and read the chip data.
You can check the read process in the bottom left corner. Wait patiently for a few minutes.
After the chip is reading successfully, click on “Save file” to save it.
STEP 3
Read IMMO data, make dealer key and add key by Xhorse VVDI2
Run VVDI2 software and select “VW”
Select Key Learn>> MQB platform instrument immobilizer>> Instrument with locked NEC35xx (MQB48, VDO/JCI)
Select “Decode immodata”
Click on “Yes” to load the encrypt data read by Xhorse Multi-Prog
Open the file
Decoding is successful, press “OK” to save the IMMO data file
Finally, use the IMMO data to make dealer key and add key.
Done
Obd2shop.co.uk Team