Share How to use Xhorse XDNP30 BOSH ECU Adapter with VVDI Key Tool Plus

Xhorse XDNP30 BOSH ECU Adapter and Cables can work with VVDI Key Tool Plus or Mini Prog to read BMW ECU ISN without soldering, support N55, N20, B38, B48 and more than 80% F series type.

This is a tutorial to demonstrate how XDNP30 BOSH ECU Adapter works with Key Tool Plus.


Step1. Connect XDNP30 Adapter with Adapter Cable & ECU, plug the other side of cable into Key Tool Plus interface;

Step2. Supply 12V power to the BOSH ECU Adapter;

Step3. Turn on Key Tool Plus, select vehicle and ECU type to check connection diagram.

(Prog >> Read ECU with CAN >> …)

Then you can go on reading ECU data.

Have the XDNP30 ECU Adapter and Cables, no longer need to solder before programming. That will save much time to improve work efficiency.

If you have problems, just can contact our email: or whatsapp: +86 13983755934 customer service