[No Tax] Launch X431 GIII X-prog3 Advanced Immobilizer & Key Programmer plus X431 MCU3 Adapter

Product Description

Launch GIII X-Prog 3 Plus X431 MCU3 Adapter

This package including product SK368 Launch GIII X-Prog 3 Plus  SK396 X431 MCU3 Adapter


Launch GIII X-Prog 3 Advanced Immobilizer & Key Programmer



Advantages:

• Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
• Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
• Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
• Compatible with: X431 V, X431 V+, X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
• Reads & writes most Engine/Gearbox ECUs without disassembling the shell
• X431 GIII XPROG3 for Data Clone function must use with X431 PAD 5, X431 PAD 7 or X431 PRO 5

• Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key)
• Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
• Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
• Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
• Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
• Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

• Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
• Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
• Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
• Supports ECU replacement for the fourth-generation of VW/AUDI engine;
• Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
• Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
• Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
• Supports the BMW CAS4/CAS4+ module replacement.
• Supports the ECU cloning and replacement for BMW Siemens engines.
• Erase the password for Mercedes-Benz engine and gearbox within 3S.
• Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

Launch X431 MCU3 Adapter 

Works together with X-PROG3 as readings of new ECUs TCM, Mercedes all keys lost etc.

Adapter board code: 307140131
 
Equipment configuration: non-standard accessories, optional.
 

When is it can be used?

1. Use the BENCH mode to clone the ECU module, when the 120 ohm resistor is connected as shown in Figure 1, or when the +12V power supply is connected to the IMMO programmer board; the IMMO programmer MCU3 adapter board (with its own power supply) can be used, as shown in Figure 2.






2. With all keys lost for Mercedes-Benz, and the connection for key learning is shown in Figure 3 when operating on the platform.



Package including

Launch XPROG -3 

• Main unit
• Power adaptor
• Main diagnostic cable
• The fourth-generation data acquisition cable
• BENCH mode cable
• MCU converter V1
• MCU converter V2
• MCU cable with multiple leads
• EEPROM chip adaptor
• Benz infrared analog acquisition key
• MCU cable with multiple leads
• EEPROM converter
• User Manual

MCU3 adapter
1pc x IMMO programmer MCU3 adapter board kit

 

If you have any questions about the device, the price, or the payment, please feel free to contact us.

Contact Person: Elyza

Whatsapp: +86 13983755934

Telephone: +86 13983755934

Wechat: +86 13983755934

Official Email: Sales@obd2shop.co.uk

Skype: OBD2Tool.co.uk