Top 4 Reasons to Get X PROG3 from us:
1. Launch X431 is a global leading brand, popular among customers, worth trusting.
2. We are an Authorized Launch Dealer, Guarantee it is a 100% Original Launch machine.
3. All products have been passed the strict quality test before shipment, make sure high quality.
4. Support 1-year free update online.
What is Launch X-PROG 3?
X-PROG 3 Immobilizer Programmer is a kind of anti-theft product, which is a powerful chip read and write device. It is mainly used to read and write car key chip data, including EEPROM read and write, onboard MCU read and write, Benz infrared key generation, special key generation, BMW engine ins code reading, BMW cas4 + / FEM chip reading and writing, etc. Can be used with a variety of comprehensive diagnostic equipment, without binding, flexible, stable, and reliable products. It is suitable for the automotive electronics industry/ locksmith/ maintenance factory and other professional users.
Launch X PROG 3 Features:
1. Integrated multi-function module, one machine with multiple functions, high-cost performance.
2. Fast and accurate reading and writing of data.
3. Powerful functions, supporting Mercedes-Benz infrared key reading/writing, BMW engine ISN code reading, engine reading in BENCH mode, etc.
4. It can be used with a variety of Launch X-431 products (X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII, X431 V , X431 V+ , X431 PRO3s+) without binding; flexible use and a wide adaptation range.
Launch X PROG 3 Functions:
1. EEPROM read and write
2. MCU read and write
3. Benz key
4. Key Simulator
5. Volkswagen's fourth-generation instrument disassembly and reading are all lost
6. BENCH mode read engine
7. Boot mode read engine
8. All Volkswagen 4th generation free accounts are lost
9. Reading gearbox data
10. Reading and writing of keys
11. BMW engine ISN code reading
12. BMW CAS4+, FEM chip read and write
13. Reading and writing of Audi's fifth-generation steering column chip
14. OBD reads MED17 engine
15. Volkswagen fourth-generation UDS engine replacement
16. Volkswagen MQB engine, gearbox, steering column lock replacement
17. Benz engine gearbox wipe empty function
More features are constantly updated...
Uses of Launch X-PROG 3
Support Car Brands
Volkswagen, Audi, Skoda, Seat, BMW, Mercedes-Benz, Toyota, and more models continue to be updated...
Support System
Engine system, automatic transmission, instrument system, CAS, body system, lock system, etc.
It supports mainstream manufacturers of common ECU MCUs, with more than 1,000 product models and continuous updates
Atmel NSC
Fujitsu Philips
Infineon Renesas M16
MC68HC05 Renesas M32
MC68HC08 Renesas M32R
MC68HC11 Renesas R32C
MC68HC12 Renesas R8C
MediaTek Renesas V850 SPI
MicroChip Renesas V850 UART
Nordic Samsung
ST SiLabs
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and is continuously being updated.
4Wire GI Numonyx SST
Adesto GigaDevice OKI ST
AKM Grundig ONSemi Toshiba
Altera HOLTEK Other Winbond
Amic Hynix PCT Xicor
Atmel I2C Philips xUSSR
BOSCH ITT Pioneer YMC
Catalyst KHIC PMC Spansion
Chingis Macronix Ramtron SPI
Dallas/Maxim Microchip Rohm NEC
EON Micron Samsung NSC
ESMT MicroWire Seiko Ford
EXEL Mitsubishi Siemens Fujitsu
Fairchild Motorola Sony
Launch XPROG 3 Specification:
Interface: DB26、DB15
Input voltage: DC 12V
Input current: < 500mA
working temperature: 0-50℃
Storage temperature: -20-70℃
X-prog 3 Common Operations:
1. Establish Hardware Connection
You need to turn off the ignition and correctly locate the vehicle Data Link Connector (DLC) so as to perform a hardware connection.
You can refer to the table below for hardware connection:
User Scenario | Cable Image | End A | End B | End C |
Key programming | ![]() Main diagnostic cable |
Connect with Launch VCI connector for data transmission | Connect with vehicle's DLC | Connect with X-PROG 3 |
Engine/Gearbox programming | ![]() Power cable |
Connect power supply | N/A | Connect with end B the main diagnostic cable |
Engine/Gearbox programming | ![]() MCU cable with multiple leads |
Connect with X-PROG 3 | Connect with the engine or gearbox to be repaired/replaced | N/A |
Engine/Gearbox programming | ![]() Main diagnostic cable |
Connect with Launch VCI connector for data transmission | Connect power supply cable | Connect with X-PROG 3 |
2. Establish Wireless Connection
You must make sure that your diagnostic tool is well connected with X-PROG 3, follow the steps below to check wireless connection:
Note: It is strongly recommended to connect the diagnostic tool with the VCI connector using a USB cable for effective data transmission.
1). Slide down the status bar from the top.
2). Touch go to Wireless and network -> Bluetooth.
3). Select the X-PROG 3 to be connected, wait until the connection is successful.
3. Perform Common Operations
You should enter the function interface before using the programmer.
1). Turn on a Launch diagnostic tool, and/or open the diagnostic App on the home screen.
2). On the main diagnostic screen, enter the Anti-theft system either from Local Diagnose or Reset, touch OK.
3). You will view the connection diagram, touch OK.
4). Depending on your requirement, touch any of the following options :
• Gearbox Learning
• Anti-Theft System
• Engine System
X431 X-PROG 3 Package list:
Power port——For power charging
DB15 diagnostic connector——To connect with main diagnostic cable
Benz key slot——To place Benz car key
Key slot——To place car key for RF defection
Key chip slot——To place key chip
Power indicator——• Red light indicates faults • Orange light indicates functions normally
DIY slot——To insert vehicle DIY board
Valve——To tighten loose EEPROM board
EEPROM slot——To insert EEPROM board
DB26 diagnostic connector——To connect with all anti-theft cables
X431 XPRO G3 Package List: