Product Description
1) This is OBDSTAR D800 Full Configuration A + B + C + D for Marine (Jet Ski/ Outboard/ Inboard/ Generator)
2) D800 adopts the latest 3.0 APK platform and has shortcut functions such as auto-identification, intelligent retrieval, and one-click feedback. The equipment, with its fast upgrade performace and built-in help materials, is a good helper for marine maintenance engineers!
OBDSTAR D800 A + B + C + D Full Configuration for Marine (Jet Ski/ Outboard/ Inboard/ Generator)
OBDSTAR D800 has the following Configuration
A: Jet ski B: Outboard C: Inboard D: Generator
D800 A+B: Jet ski, Outboard
D800 C+D: Inboard, Generator
D800 A+B+C+D: Jet ski, Outboard, Inboard, Generator
More details, please check the software configurations in 'Specifications' and the coverages in 'Function Manual
This is OBDSTAR D800 Full Configuration A + B + C + D for Marine (Jet Ski/ Outboard/ Inboard/ Generator)
Description
D800 is OBDSTAR's new generation device for marine (jet ski/ outboard/ inboard/ generator) intelligent diagnosis. Based on Samsung Exynos processor, it is equipped with an 8-inch display screen, which is extremely fast and smooth. D800 adopts the latest 3.0 APK platform and has shortcut functions such as auto-identification, intelligent retrieval, and one-click feedback. The equipment, with its fast upgrade performace and built-in help materials, is a good helper for marine maintenance engineers!
Check OBDSTAR D800 Support List
Check OBDSTAR D800 User manual
OBDSTAR D800 Features:
1. The OBDSTAR mobile APP integrates functions such as diag socket location, flash code query, technical bulletin, manual service function(service lamp reset), basic parameters, etc., working with D800 to make marine diagnosis more accurately and efficiently (some functions are only available for D800 users to check for free);
2. The exclusive interactive wiring diagram and electrical appliance description query function make your diagnosis worry-free;
3. Various data flow display modes such as text, waveform diagram and instrument diagram allow you to easily analyse faults;
4. Auto Scan, Active Trim Configuraion, Active Trim GPS Configuraion, Auxiliary Joystick Congfiguration, BCM Simulator, Compass Congfiguration, Device Initialization, Drive Alignment, Helm Setup, Instance Setting, Maintenance Setting, Merc TDS Reset, Remote Control Reset, Set Engine Location, Set Tach Link, Set Tilt Limit, SMUX Congfiguration, Steeing Wheel Centering, Syetem Calibration, Torque Ajustment, Trackpad Configuration, Vessel Personality, and other functions.
D800 Functions
1. New android 5.1.1 operation system;
2. Simple and intuitive menu guidance allows you to quickly master the equipment operation;
3. Provide complete diagnostic functions including ECU information, code reading, code clearing, data flow, freeze frames, action test, setting, coding etc;
4. Record and play back real-time flow, quickly and accurately locate sensor and component faults;
5. Wi-Fi connection to the internet, one-click software upgrade;
6. One-click remote function, OBDSTAR technical staff remote assistance.
Advanced Function
1. The OBDSTAR mobile APP integrates functions such as diag socket location, flash code query, technical bulletin, manual service function(service lamp reset), basic parameters, etc., working with D800 to make marine diagnosis more accurately and efficiently (some functions are only available for D800 users to check for free);
2. The exclusive interactive wiring diagram and electrical appliance description query function make your diagnosis worry-free;
3. Various data flow display modes such as text, waveform diagram and instrument diagram allow you to easily analyse faults;
4. Auto Scan, Active Trim Configuraion, Active Trim GPS Configuraion, Auxiliary Joystick Congfiguration, BCM Simulator, Compass Congfiguration, Device Initialization, Drive Alignment, Helm Setup, Instance Setting, Maintenance Setting, Merc TDS Reset, Remote Control Reset, Set Engine Location, Set Tach Link, Set Tilt Limit, SMUX Congfiguration, Steeing Wheel Centering, Syetem Calibration, Torque Ajustment, Trackpad Configuration, Vessel Personality, and other functions.
Supported Brands
AIQIDI, CATERPILLAR, CFMOTO, CRUSADER ENGINES, CUMMINS MARINE, CUMMINS MERCRUISER DIESEL, DAEDONG, DAF MARINE, EVINRUDE, FLAGSHIP, FNM MARINE, FORD MARINE, FPT (Fiat Powertrain Technologies), HIDEA, HONDA, HYUNDAI SEASALL, ILMOR, INDMAR, JOHNSON, KAWASAKI, KODIAK MARINE, LOMBARDINI MARINE, MALIBU, MAN MARINE, MARINER, MARINE POWER, MERCRUISER, MERCURY, MERCURY DIESEL, MTU, PARSUN, PANTHER AIRBOATS, PCM Marine Engines, PERKINS, SCANIA MARINE, SEA-DOO(BRP), SELVA MARINE, SEVEN MARINE, SISU, STEYR MOTORS, SUZUKI, TOHATSU, TOYOTA MARINE, TURNKEY, VM MOTORI, VOLKSWAGEN, VOLVO PENTA, YAMAHA, YANMAR...
More functions are under development...
D800 Marine Diag Software Update
MERCURY [Version:V31.20]
1.Add below functions:
● Thruster Control
·Steering Bleed Steerable Gearcase
● Trim Relay
·Steering Drain
●Transmission Value
● Transmission Shift
●Auto Test action
2.Add below special functions:
·Maintenance
·SMUX Configuration
·Autopilot Configuration
● Trackpad Configuration
·Transmission Characteristics
·Confirm Vessel Harnessing
●Fathom ll Enable
● Tller Adapt
·Steering System to DTS
3.Optimized software.
VOLVO【Version:V31.12】
1.Add Parameter Programming function.
2.Add parameter programming special function,support below programmable parameters:
●9D:Road speed limit,mandated by law
●AIS:Injector cylinder 1,calibration
●AIT:Injector cylinder2,calibration
·AlU:Injector cylinder 3,calibration
● AIV:Injector cylinder 4,calibration
● AIW:Injector cylinder 5,calibration
·AIX:Injector cylinder 6,calibration
●AlZ:Fuel consumption,calibration percent
● AJ:Diff RSL,enable/disable
·AJM:Full load calibration,in production
●AU:Maxengine speed stationary
● AZO:Enable High End Governor Engine Speed
●AZQ:High gear ratio end governor engine speed
●AZR:Max espd,gear ratio setting
●AZS:Max espd,gearratio for limited max espd
● BNQ:Max engine speed at speed error
● BNS:Governor mode
● BNT:Overspeed limit
● BNW:Overspeed shutdown
● BNX:Oil temperature warning
● BPA:Coolant temperature warning
● BPD:Idle engine speed
● BPG:Idle speed voltage
● BPJ:Max speed voltage
● BPM:Lamp test
● BPN:Governor droop
● BPQ:Preheat on ignition
● BPR:Coolant level derate
● BPS:Oil pressure derate
● BPT:Coolant temperature derate
● BPU:Governor gradient
● BQA:Oil temperature derate
● BQB:Boosttemperature derate
● BQF:Stop function EMS,Energized to
● BQK:Exhaust temperature derating disabled
● CNR:PTO governor gradient used
● DKR:Injector class
● DN:Cust data,Fleet ID
● DV:Diff RSL,max vspd next highest gear
● DX:Cust data,engine ECU password
● DYG:Adjustmentfactor for high I-gain of espd governor
● DYH:Adjustment factor for low I-gain ofespd governor
● DYI:Adjustment factor for low P-gain of espd governor
● DYJ:Adjustment factor for low D-gain of espd governor
● DYK:Adjustment factor for high P-gain of espd governor
● DYL:Adjustment factor for high D-gain of espd governor
● DYM:Enable flag forlower torque limit
●ECQ:Crankcase pressure derating disabled
●ECR:Piston cooling pressure deratingdisabled
●ECT:Boost pressure derating disabled
●EG:Engine oil temperature
● FMF:Oil temperature derating disabled
● FMG:Boost temperature derating disabled
● FMH:Coolant level derating disabled
● FMI:Oil pressurederating disabled
● FMJ:Coolant temperature derating disabled
● FSN:Oil temperature warning limit
● FSO:Coolant temperature warning limit
● FSQ:Cylinder balancing forced status
● FVS:Engine Protection -Oil Pressure Shutdown
● FVU:Engine Protection -Coolant Level Shutdown
● FVW:Engine Protection-Coolant Temp Shutdown
● FVY:Engine Protection-Trans Temp Shutdown
● GFF:Total injected fuel quantity
● GFG:Rail pressure set-point
● GFH:PRV total opened time
● GHA:Engine ProtectionOil Temp Shutdown
● IAW:Stop fuel EMS,Energized to
● ISD:Low battery alarm level
● ITX:Enable AutomaticAt Speed Regeneration
● ITY:Enable Inhibit Regeneration
● ITZ:Enable Man Stat Regeneration
● IUA:CM1 diag from Cluster
● IUC:CM1 diag from DPF Smart Switch
● IUE:Enable Man Moving Regeneration
● IUI:Request reset when faultycomponent replaced
● JAA:The PTO is driveshaft
● JAC:Enable Manual Regen During PTO
● JXC:PTO Governor Type
●MUR:Enable High Pressure Fuel Pump Failure Diagnosis
● NMI:DEF Dosing Injector Derating Disabled
● NMW:Enable Energized To Run
● PDC:Application Type Industrial
● PDD:Application Type Marine
● QHP:Battery Usage
● RRA:E-key,Keyfob not Required,Enable
● VIN:Vehicle IdentificationNumber
● YA:Idle speed,setting
YANMAR [Version:V31.04]
1.Add system freeze frame function for below models:
●4JH110
●4LV250
●4JH45
·6LY3_ETA
●4JH57
·6LY3_ETP
●4JH80
·6LY3_STA
●4LV150
·6LY3_STP
●4LV170
●8LV-320/320Z
●4LV195
●8LV-350/350Z
●4LV230
·8LV-370/370Z
2.Optimized software
Specifications
|
Operation system
|
Android 5.1.1
|
|
CPU
|
Exynos4418 qual core ARM cortex A9
|
|
Battery
|
3700mA, rechargeable polymer lithium battery
|
|
Extension memory card
|
32G micro SD (TF) card supported
|
|
Storage capacity
|
32GB
|
|
LCD
|
8.0 inch
|
|
LCD resolution
|
1280*800
|
|
Touch screen
|
Capacitive touch screen
|
|
Wifi
|
Supported
|
|
Camera
|
5 mega rear view camera
|
|
Working temperature
|
-10℃~55℃ (14℉~131℉)
|
|
Storage temperature
|
-20℃~70℃ (-4℉~158℉)
|
|
Weight
|
1kg (main unit)
|
|
Dimension
|
254mm*174mm*35mm
|
D800 Software Configurations

Package Includes:
1pc x Tablet
1pc x M000A 4 meters extension cable
1pc x M001B main cable
1pc x M002D 6 meters power cable
1pc x M003A multi functional jumper
1pc x M015A adapter for Honda
1pc x M021A adapter for PARSUN
1pc x M043 adapter for BRP
1pc x M060 adapter for MERCURY
1pc x M061 adapter for YAMAHA
1pc x M062 adapter for SUZUKI
1pc x M063 adapter for PCM-6
1pc x M064 adapter for MERCURY
1pc x M065 adapter for EVINRUDE
1pc x M068 adapter for KAWASAKI
1pc x M070 adapter for TOHATSU
1pc x M071 adapter for TOHATSU
1pc x M072 adapter for MERCRUISER
1pc x M073 adapter for INDMAR-6
1pc x M074 adapter for YANMAR-3
1pc x M075 adapter for YANMAR-6
1pc x M078 adapter for MERCURY DIESEL-9
1pc x M080 adapter for CATERPILLAR-9
1pc x M081 adapter for MAN-8
1pc x M083 adapter for CUMMINS-9
1pc x M084 adapter for SCANIA-4
1pc x M086 adapter for VOLVO-6
1pc x 12V 2A Charger



Hot Branded Products:







Shipping method and delivery time:
UK Shipping (No Tax) : 2-4 working days arrive. For products marked " UK Ship " and UK local customer
EU shipping (No Tax) : 5-7 working days arrive. For products marked " EU Ship " and from EU countries, if not belong to EU, need to clearance
Yodel (No Tax) : 5-7 days arrive . For products UK out of stock, and customers from UK
Yun Express ( No Tax) : 5 - 9 working days to UK, 7-14 days to other European Countries.
Yanwen (No Tax) : 5 - 9 working days to UK, 7-14 days to other European Countries, ship to all over the world, mainly for UK/EU warehouse no stock
DHL: need to clearance, 3-5 working days arrive. Used for UK/EU no stock, customers request ship this way. Need to clearance, we will declare a low price on the invoice help to clearance.
If you have any questions about the device, the price, or the payment, please feel free to contact us.
Contact Person: Elyza
Whatsapp: +86 13983755934
Telephone: +86 13983755934
Wechat: +86 13983755934
Official Email: Sales@obd2shop.co.uk